Skip to contentSkip to conversation

Problems booting with Kernel 2.6.2: filesystem is mounted read-only

DISCUSSION Cedric Laczny 2 participants 3 messages Feb 19, 2004

lore
Share & tools
lore
#0 lore raw

Hello!

I'm totally new in compiling a kernel, but apperantly (all make commands went trough without complaining:) ) I made it to compile my own kernel 2.6.2 on Fedora Core1.
It even does boot, using grub, but after searching or intialising the main hardware, it doesn't get write permission. It's copmplaining that the filesystem is read-only...
I erased the "ro" option from grub.conf, but nothing changed. Givin it the "rw" option brings e2fsck to complain but doesn't boot up completly either.
Unfortunately I can't get a log of the failures, because it hangs during initialising the "Systemlogger". Before that, it starts kudzu, tries to acces some ksyms files in /var, initializes the eth0 interface and can't initialize the ppp0 interface.

Booting my 2.4.22 unchanged Fedora Core1 kernel works totally fine.

Anyone an idea, what to do, or what I've could have done wrong during compiling?

Best regards,

Cedric Laczny

#1 lore raw
Quoted 4 lines · Cedric Laczny

Unfortunately I can't get a log of the failures, because it hangs during initialising the "Systemlogger". Before that, it starts kudzu, tries to acces some ksyms files in /var, initializes the eth0 interface and can't initialize the ppp0 interface.

So log across the network if you can't log locally.

Signature · 3 lines
Matthias Andree

Encrypt your mail: my GnuPG key ID is 0x052E7D95
#2 lore raw
In reply to Cedric Laczny
Quoted 1 line

So log across the network if you can't log locally.

But how do I do this?
It's a single user machine, I don't have a private network running

BTW: How do I get the replys to my post send to my eMail inbox??? I got problems with replying...
Perhaps anyone knows a german HOWTO, that I could read through for the mailing list?