: Megaraid patch for 2.6 4/5
Subsystems (2)
PATCH 1/1 : Megaraid patch for 2.6 4/5
Hi all,
This updates some dmesg comments in the 2.6 driver, to make them more textually consistent.
drivers/scsi/megaraid.c +6 -6
@@ -4587,7 +4587,7 @@ subsysvid = pdev->subsystem_vendor; subsysid = pdev->subsystem_device; -printk (KERN_NOTICE "megaraid: found 0x%4.04x:0x%4.04x:bus %d:" , +printk (KERN_NOTICE "megaraid: notified of 0x%4.04x:0x%4.04x:bus %d:" , id->vendor, id->device, pci_bus); printk("slot %d:func %d\n",
@@ -4602,7 +4602,7 @@ flag |=BOARD_MEMMAP ;if (!request_mem_region (mega_baseport,128 ,"megaraid" )) { -printk (KERN_WARNING "megaraid: mem region busy!\n" ); +printk (KERN_WARNING "megaraid: mem region busy\n" ); goto out_disable_device; }
@@ -4629,7 +4629,7 @@memset (adapter,0 ,sizeof (adapter_t));printk (KERN_NOTICE -"scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n" , +"scsi%d: found MegaRAID controller at 0x%lx, IRQ:%d\n" , host->host_no, mega_baseport, irq); adapter->base = mega_baseport;
@@ -4665,13 +4665,13 @@ adapter->mega_buffer =pci_alloc_consistent (adapter->dev,MEGA_BUFFER_SIZE , &adapter->buf_dma_handle);if (!adapter->mega_buffer) { -printk (KERN_WARNING "megaraid: out of RAM.\n" ); +printk (KERN_WARNING "megaraid: out of RAM\n" ); goto out_host_put; } adapter->scb_list =kmalloc (sizeof (scb_t) *MAX_COMMANDS ,GFP_KERNEL );if (!adapter->scb_list) { -printk (KERN_WARNING "megaraid: out of RAM.\n" ); +printk (KERN_WARNING "megaraid: out of RAM\n" ); goto out_free_cmd_buffer; }
@@ -4679,7 +4679,7 @@ megaraid_isr_memmapped : megaraid_isr_iomapped, SA_SHIRQ, "megaraid", adapter)) {printk (KERN_WARNING -"megaraid: Couldn't register IRQ %d!\n" , irq); +"megaraid: couldn't register IRQ %d\n" , irq); goto out_free_scb_list; }
drivers/scsi/megaraid.c +6 -6
@@ -4587,7 +4587,7 @@ subsysvid = pdev->subsystem_vendor; subsysid = pdev->subsystem_device; -printk (KERN_NOTICE "megaraid: found 0x%4.04x:0x%4.04x:bus %d:" , +printk (KERN_NOTICE "megaraid: notified of 0x%4.04x:0x%4.04x:bus %d:" , id->vendor, id->device, pci_bus); printk("slot %d:func %d\n",
@@ -4602,7 +4602,7 @@ flag |=BOARD_MEMMAP ;if (!request_mem_region (mega_baseport,128 ,"megaraid" )) { -printk (KERN_WARNING "megaraid: mem region busy!\n" ); +printk (KERN_WARNING "megaraid: mem region busy\n" ); goto out_disable_device; }
@@ -4629,7 +4629,7 @@memset (adapter,0 ,sizeof (adapter_t));printk (KERN_NOTICE -"scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n" , +"scsi%d: found MegaRAID controller at 0x%lx, IRQ:%d\n" , host->host_no, mega_baseport, irq); adapter->base = mega_baseport;
@@ -4665,13 +4665,13 @@ adapter->mega_buffer =pci_alloc_consistent (adapter->dev,MEGA_BUFFER_SIZE , &adapter->buf_dma_handle);if (!adapter->mega_buffer) { -printk (KERN_WARNING "megaraid: out of RAM.\n" ); +printk (KERN_WARNING "megaraid: out of RAM\n" ); goto out_host_put; } adapter->scb_list =kmalloc (sizeof (scb_t) *MAX_COMMANDS ,GFP_KERNEL );if (!adapter->scb_list) { -printk (KERN_WARNING "megaraid: out of RAM.\n" ); +printk (KERN_WARNING "megaraid: out of RAM\n" ); goto out_free_cmd_buffer; }
@@ -4679,7 +4679,7 @@ megaraid_isr_memmapped : megaraid_isr_iomapped, SA_SHIRQ, "megaraid", adapter)) {printk (KERN_WARNING -"megaraid: Couldn't register IRQ %d!\n" , irq); +"megaraid: couldn't register IRQ %d\n" , irq); goto out_free_scb_list; }