Skip to contentSkip to conversation

Dynamic redirection?

DISCUSSION Glen Becker 3 participants 4 messages Feb 26, 2004

lore
Share & tools
lore
#0 lore raw

Hello, I haven't been lurking here long but have tried the FAQs, tutorials and How-To's. I'm an iptables novice. I thought this would be simple; I hope I'm overlooking something obvious.

I have a Linux server acting as a gateway between the internet and the internal network, allowing only authenticated hosts internet access. I have a simple FORWARD (policy DROP) ruleset into which individual hosts, after authentication, are inserted and allowed internet access. As each host's session time expires, the corresponding ACCEPT rule is removed from FORWARD. That all works well.

Now I would like to do something like DNAT for http connections from NON-authenticated hosts to a webserver on my gateway box, but still let authenticated hosts through.

-t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1 unfortunately catches everything.

Is there a way to "redirect" web connections only if the packet hasn't already been ACCEPTed for forwarding?

For example:
Host 192.168.2.128 is authenticated and should be allowed any internet connections. http requests from all other internal hosts are sent to the local web server:

-P FORWARD DROP
-A FORWARD -p udp --dport 53 -j ACCEPT
-A FORWARD -p udp --sport 53 -j ACCEPT
-A FORWARD -s 192.168.2.128 -p ALL -j ACCEPT
-A FORWARD -d 192.168.2.128 -p ALL -j ACCEPT
-A [something really smart like DNAT but only if the packet traverses this far]

Thanks

-Glen

#1 lore raw
Quoted 2 lines · Glen Becker

Is there a way to "redirect" web connections only if the packet hasn't already been ACCEPTed for forwarding?

Since DNAT is performed in PREROUTING, which comes before FORWARD, it is impossible to base the DNAT decision off whether the packet is accepted in FORWARD.

You need to duplicate your authentication rules in the nat table.

Quoted 11 lines

For example:
Host 192.168.2.128 is authenticated and should be allowed any internet connections. http requests from all other internal hosts are sent to the local web server:

(quoted diff) +0 -6
-P FORWARD DROP
-A FORWARD -p udp --dport 53 -j ACCEPT
-A FORWARD -p udp --sport 53 -j ACCEPT
-A FORWARD -s 192.168.2.128 -p ALL -j ACCEPT
-A FORWARD -d 192.168.2.128 -p ALL -j ACCEPT
-A [something really smart like DNAT but only if the packet traverses
Quoted 1 line

this far]

Use these rules:

-t nat -A PREROUTING -s 192.168.2.128 -j ACCEPT
-t nat -A PREROUTING -d 192.168.2.128 -j ACCEPT
-t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1 -P FORWARD DROP
-A FORWARD -p udp --dport 53 -j ACCEPT
-A FORWARD -p udp --sport 53 -j ACCEPT
-A FORWARD -s 192.168.2.128 -p ALL -j ACCEPT
-A FORWARD -d 192.168.2.128 -p ALL -j ACCEPT

If you don't like duplicating the rules like that, then you could set marks in mangle PREROUTING and base both the nat and filter rules off the mark. Or you could patch your kernel to use ippool or ipset, then you wouldn't need to dynamically add rules at all, you just have one rule each in nat and filter referring to the pool/set.

Signature · 1 line
Philip Craig - SnapGear, A CyberGuard Company - http://www.SnapGear.com
#2 lore raw

Craig, thanks! That works great for now; "simple is good". If time permits later I would like to experiment with your and Jeroen's suggestion of marking.

-Glen

Quoted 16 lines · Philip Craig

Use these rules:

(quoted diff) +0 -8
-t nat -A PREROUTING -s 192.168.2.128 -j ACCEPT
-t nat -A PREROUTING -d 192.168.2.128 -j ACCEPT
-t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1
-P FORWARD DROP
-A FORWARD -p udp --dport 53 -j ACCEPT
-A FORWARD -p udp --sport 53 -j ACCEPT
-A FORWARD -s 192.168.2.128 -p ALL -j ACCEPT
-A FORWARD -d 192.168.2.128 -p ALL -j ACCEPT

If you don't like duplicating the rules like that, then you could set marks in mangle PREROUTING and base both the nat and filter rules off the mark. Or you could patch your kernel to use ippool or ipset, then you wouldn't need to dynamically add rules at all, you just have one rule each in nat and filter referring to the pool/set.

#3 lore raw
In reply to Glen Becker

Hi,

Duplicate your forwarding rules to the mangle PREROUTING table, but instead of -j ACCEPT, do a -j MARK --set-mark 1.

After that, do a NAT with "-m mark ! mark 1".

Should work.
Cheers,
Jeroen.

Quoted 39 lines · On 26 Feb 2004 00:42:31 -0500 Glen Becker <[email protected]> wrote:

Hello, I haven't been lurking here long but have tried the FAQs, tutorials and How-To's. I'm an iptables novice. I thought this would be simple; I hope I'm overlooking something obvious.

I have a Linux server acting as a gateway between the internet and the internal network, allowing only authenticated hosts internet access. I have a simple FORWARD (policy DROP) ruleset into which individual hosts, after authentication, are inserted and allowed internet access. As each host's session time expires, the corresponding ACCEPT rule is removed from FORWARD. That all works well.

Now I would like to do something like DNAT for http connections from NON-authenticated hosts to a webserver on my gateway box, but still let authenticated hosts through.

-t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j DNAT --to 192.168.2.1 unfortunately catches everything.

Is there a way to "redirect" web connections only if the packet hasn't already been ACCEPTed for forwarding?

For example:
Host 192.168.2.128 is authenticated and should be allowed any internet connections. http requests from all other internal hosts are sent to the local web server:

(quoted diff) +0 -6
-P FORWARD DROP
-A FORWARD -p udp --dport 53 -j ACCEPT
-A FORWARD -p udp --sport 53 -j ACCEPT
-A FORWARD -s 192.168.2.128 -p ALL -j ACCEPT
-A FORWARD -d 192.168.2.128 -p ALL -j ACCEPT
-A [something really smart like DNAT but only if the packet traverses

this far]

Thanks

-Glen