Terratec DMX XFire DSP
Hi Benny,
regarding your cs46xx DSP and codec list:
AFAIK the Xfire card has got a CS4624 DSP, not a CS4630. The main (only?) difference should be the processing power (CS4624: 255MIPS, CS4630: 420MIPS). I think the CS4630 can handle AC3 input through S/P-DIF whereas the CS4624 does not (because of the proc. power?). AC3 out should be working with both DSPs.
Are there any more differences you know of?
Is there any possibility for me to check the codec type of the Xfire card e.g. under windows or by looking at the components on the cards? regardsfritz_e
Signature · 9 lines
GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Quoted 6 lines
regarding your cs46xx DSP and codec list:
AFAIK the Xfire card has got a CS4624 DSP, not a CS4630. The main (only?) difference should be the processing power (CS4624: 255MIPS, CS4630: 420MIPS).
Are you sure ?
If the Windows system properties tells say that's a CS4624 it can be becourse
it uses the same driver for both cs4630 and cs4624, as they are binary compatible.
If you do a "lspci" on Linux it will probably say that it's cs4624/ ..SoundFusion (something), but does not mean that the device really has a cs4624.
Just sounds strange for me that Terratec have choosen the cs4624 ....
Quoted 5 lines
Are there any more differences you know of?
Is there any possibility for me to check the codec type of the Xfire card e.g. under windows or by looking at the components on the cards?
Look at your card physically, you may find the codec chips close to the DSP chip. It would be great if you could do so.
/Benny
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf