drivers/ieee1394/sbp2.c:734: error: `host' undeclared (first use in this function) 2.6.3-bk3
Hi. I just saw your questions on LKML about this problem. The current status is that the problem (for me) still exists (but a solution is in progress). The initial problem was that the kernel build failed. Both Ben Collins' and Dave Jones' solutions fixed that problem and the build process is successful, but my external firewire drives weren't working. Ben suspected IEEE1212 detection wasn't working and sent me csr_dump. I ran it and it confirmed that not all of my hardware rom is being read (the rom in the device, not in the 1394 controller) and so devices aren't being detected.
Ben contacted Steve Kinneberg (who contacted me). I sent Steve a (really ugly hack) of csr_dump to try and display all of the rom, but there are still quadlets not being detected. I don't have IEEE1212 spec sheets and am not familiar with the protocol, but Steve said that a CSR (configuration and status rom) node is missing from the ieee1212 root directory for my hard drives, and there is a gap in the rom data. Steve is working on a updated csr_dump and hoped to have it finished this weekend. I would suspect that anyone with Oxford Semi FW900 controllers would have the same problem (certainly anyone with same rom). I have a sony camera connected to the 1394 bus also, and it gets detected perfectly.
Bob