AC97 WM9713 power and audio changes
PATCH 1/1 AC97 WM9713 power and audio changes
Hi,
I've attached a patch against 2.4.25 that improves performance and power levels in the WM9713.
Jeff, this depends on the previous AC97 patch I sent.
Changes:-
o Lower power consumption
o Better quality playback and record.
o Codec specific init() is now done after initialisation of the mixer
channel volumes. This prevents any init settings being clobbered by the mixer volumes.
Liam
drivers/sound/ac97_codec.c +10 -8
@@ -932,11 +932,6 @@ codec->recmask_io = ac97_recmask_io; codec->mixer_ioctl = ac97_mixer_ioctl; -/* codec specific initialization for 4-6 channel output or secondary codec stuff */ -if (codec->codec_ops->init !=NULL ) { - codec->codec_ops->init (codec); - } -/* initialize mixer channel volumes */ for (i =0 ; i <SOUND_MIXER_NRDEVICES ; i++) {struct mixer_defaults *md = &mixer_defaults[i];
@@ -947,6 +942,11 @@ac97_set_mixer (codec, md->mixer, md->value); } +/* codec specific initialization for 4-6 channel output or secondary codec stuff */ +if (codec->codec_ops->init !=NULL ) { + codec->codec_ops->init (codec); + } +/* * Volume is MUTE only on this device. We have to initialise * it but its useless beyond that.
@@ -1104,10 +1104,12 @@/* WM9713 */ static int wolfson_init13 (struct ac97_codec * codec) { - codec->codec_write (codec,AC97_MASTER_VOL_STEREO ,0x0000 ); - codec->codec_write (codec,AC97_HEADPHONE_VOL ,0x0000 ); codec->codec_write (codec,AC97_RECORD_GAIN ,0x00a0 ); - codec->codec_write (codec,AC97_EXTEND_MODEM_STAT ,0x0000 ); + codec->codec_write (codec,AC97_POWER_CONTROL ,0x0000 ); + codec->codec_write (codec,AC97_EXTENDED_MODEM_ID ,0xDA00 ); + codec->codec_write (codec,AC97_EXTEND_MODEM_STAT ,0x3810 ); + codec->codec_write (codec,AC97_PHONE_VOL ,0x0808 ); + codec->codec_write (codec,AC97_PCBEEP_VOL ,0x0808 );return 0 ; }