Kernel panics on VIA motherboard with USB devices
Hi all,
I'm trying to get my new machine to work with Linux, but I'm having some problems.
Machine specs:
ASUS A7V600-X motherboard (KT600 & VIA 8237)
Athlon XP 2400+
512MB RAM
WD 80G HD on primary IDE
TV-Tuner (bt848)
Initio UW-SCSI card
Nvidia Ti 4200 gfx card
I'm running gentoo linux, 2.4.25-pre kernel and the latest hotplug.
The mobo has a total of 4 USB ports 2.0 at the back. The problem lies at the usb devices, and hotplug.
I have a usb bluetooth dongle connected, and a usb to serial adaptor. This setup gets me to KDE ok, and everything works, including some usb storage devices that I may plug during up-time.
But, if I try to restart hotplug, I get kernel oops. From there on, pretty much everything will seg fault when I try to load it, I can not login to a console, and when the machine tries to reboot, it hangs. strace shows that apps hang when trying to access /dev/tty.
Similar problems exist even with kernel 2.6.4. I have tried the same usb devices in 2 more similar PC's (with the same mobo), and all produce the same error. When more usb devices are connected at boot, things can lead to a total lockup during boot.
Anyone has any ideas what I can do about this? Are there any known problems with VIA chips and linux? I have the results from ksymoops on those oop'ses at home, if anyone is interested, I can send them.
Thanks,
Emmanuel
Hi again,
I'm attaching the outpout from ksymoops, plus some more:
winterland root # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:0b.0 SCSI storage controller: Initio Corporation 360P (rev 02) 00:0e.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3)
winterland root # lsmod
Module Size Used by Tainted: PF
ppp_deflate 3480 0 (autoclean) zlib_deflate 18168 0 (autoclean) [ppp_deflate] bsd_comp 4344 0 (autoclean) ppp_async 8320 1 (autoclean) ppp_generic 23104 3 (autoclean) [ppp_deflate bsd_comp ppp_async] slhc 5488 0 (autoclean) [ppp_generic] nls_iso8859-1 2844 0 (autoclean) nls_cp437 4348 0 (autoclean) vfat 10860 0 (autoclean) fat 34648 0 (autoclean) [vfat] usb-storage 125264 0 snd-mixer-oss 13776 0 (autoclean) sr_mod 14232 0 (autoclean) (unused) nvidia 1632640 11 (autoclean) ipt_MASQUERADE 1624 1 (autoclean) iptable_nat 19384 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 25480 1 (autoclean) [ipt_MASQUERADE iptable_nat] iptable_filter 1740 0 (autoclean) (unused) vmnet 21288 6 vmmon 23380 0 (unused) it87 10916 0 i2c-isa 1164 0 (unused) i2c-proc 7248 0 [it87] hci_usb 7548 1 pl2303 13624 1 usbserial 19836 0 [pl2303] tuner 10784 1 (autoclean) tvaudio 14364 0 (autoclean) (unused) bttv 98080 0 videodev 7104 2 [bttv] i2c-algo-bit 7688 1 [bttv] i2c-core 14052 0 [it87 i2c-isa i2c-proc tuner tvaudio bttv i2c-algo-bit] uhci 29008 0 (unused) ehci-hcd 26152 0 (unused) snd-via82xx 14272 0 snd-pcm 68736 0 [snd-via82xx] snd-timer 17380 0 [snd-pcm] snd-ac97-codec 43544 0 [snd-via82xx] snd-page-alloc 7060 0 [snd-via82xx snd-pcm] snd-mpu401-uart 4128 0 [snd-via82xx] snd-rawmidi 15840 0 [snd-mpu401-uart] snd-seq-device 4452 0 [snd-rawmidi] snd 37444 0 [snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 4580 1 [bttv snd] rtc 8572 0 (autoclean) rfcomm 37824 1 l2cap 21516 1 [rfcomm] bluez 38340 3 [hci_usb rfcomm l2cap] ip_tables 13664 5 [ipt_MASQUERADE iptable_nat iptable_filter] initio 21988 0 via-rhine 13872 1 mii 2592 0 [via-rhine]
winterland root # cat /proc/interrupts
CPU0
0: 105125 IO-APIC-edge timer 1: 3705 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 4: 203962 IO-APIC-edge serial 8: 2 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 19569 IO-APIC-edge PS/2 Mouse 14: 30651 IO-APIC-edge ide0 15: 12 IO-APIC-edge ide1 16: 77036 IO-APIC-level nvidia 17: 2 IO-APIC-level bttv 19: 21 IO-APIC-level i91u 21: 17935 IO-APIC-level ehci_hcd, usb-uhci, usb-uhci, usb-uhci, usb-uhci 22: 76 IO-APIC-level VIA8233 23: 0 IO-APIC-level eth0 NMI: 0 LOC: 105068 ERR: 0 MIS: 0
winterland root # uname -r
2.4.25_pre7-gss-r2
Thanks again,
Emmanuel
Quoted 41 lines · Emm Vasilakis
Hi all,
I'm trying to get my new machine to work with Linux, but I'm having some problems.
Machine specs:
ASUS A7V600-X motherboard (KT600 & VIA 8237)
Athlon XP 2400+
512MB RAM
WD 80G HD on primary IDE
TV-Tuner (bt848)
Initio UW-SCSI card
Nvidia Ti 4200 gfx cardI'm running gentoo linux, 2.4.25-pre kernel and the latest hotplug.
The mobo has a total of 4 USB ports 2.0 at the back. The problem lies at the usb devices, and hotplug.
I have a usb bluetooth dongle connected, and a usb to serial adaptor. This setup gets me to KDE ok, and everything works, including some usb storage devices that I may plug during up-time.
But, if I try to restart hotplug, I get kernel oops. From there on, pretty much everything will seg fault when I try to load it, I can not login to a console, and when the machine tries to reboot, it hangs. strace shows that apps hang when trying to access
/dev/tty.Similar problems exist even with kernel 2.6.4. I have tried the same usb devices in 2 more similar PC's (with the same mobo), and all produce the same error. When more usb devices are connected at boot, things can lead to a total lockup during boot.
Anyone has any ideas what I can do about this? Are there any known problems with VIA chips and linux? I have the results from ksymoops on those oop'ses at home, if anyone is interested, I can send them.
Thanks,
Emmanuel
Quoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Unable to handle kernel paging request at virtual address e0d5fc70 c026ba16 *pde = 1f763067 Oops: 0000 CPU: 0 EIP: 0010:[<c026ba16>] Tainted: PF
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010286
eax: 00008801 ebx: 00000088 ecx: 00008802 edx: e0d5fc60
esi: 00000001 edi: 00008801 ebp: dfe7ecc8 esp: cd09be58
ds: 0018 es: 0018 ss: 0018
Process input.rc (pid: 4586, stackpage=cd09b000)
Stack: dfe7ecc0 00000000 c026c6ae 00008801 c0134d99 d2d2c480 cc131ec0 080bbee6
00000000 cf5fb2ec d2d2c480 d2d2c49c c011cd02 d2d2c480 cc131ec0 080bbee6
dfe7ecc0 00000000 df890dc0 dfe7ecc8 c026d3da 00008801 cd09bec8 c158c640
Call Trace: [<c026c6ae>] [<c0134d99>] [<c011cd02>] [<c026d3da>] [<c0162331>]
[<c015856c>] [<c019fdca>] [<c0158929>] [<c014bb65>] [<c0149a03>] [<c0149928>]
[<c0149d1b>] [<c010963f>]
Code: 0f bf 42 10 39 d8 74 12 8b 92 b4 00 00 00 85 d2 75 ee 31 c9Error (pclose_local): Oops_decode_part pclose failed 0xb Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.5JQW9M
Quoted 5 lines
Quoted 5 lines
EIP;
c026ba16<get_tty_driver+16/50> <=====edx;
e0d5fc60<[tuner].data.end+5245/f645>
ebp;dfe7ecc8<_end+1f9ab184/2074351c>
esp;cd09be58<_end+cbc8314/2074351c>
Trace; c026c6ae <init_dev+1e/4b0>
Trace; c0134d99 <handle_mm_fault+69/a0>
Trace; c011cd02 <do_page_fault+142/4e0>
Trace; c026d3da <tty_open+6a/430>
Trace; c0162331 <dput+21/150>
Trace; c015856c <link_path_walk+4dc/640>
Trace; c019fdca <devfs_open+19a/230>
Trace; c0158929 <path_lookup+39/40>
Trace; c014bb65 <get_empty_filp+65/1a0>
Trace; c0149a03 <dentry_open+d3/1e0>
Trace; c0149928 <filp_open+68/70>
Trace; c0149d1b <sys_open+5b/e0>
Trace; c010963f <system_call+33/38>
Unable to handle kernel paging request at virtual address e0d5fc70
c026ba16
*pde = 1f763067
Oops: 0000
CPU: 0
EIP: 0010:[<c026ba16>] Tainted: PF
EFLAGS: 00010286
eax: 00008801 ebx: 00000088 ecx: 00008802 edx: e0d5fc60
esi: 00000001 edi: 00008801 ebp: dfe7ecc8 esp: cd09be58
ds: 0018 es: 0018 ss: 0018
Process pci.rc (pid: 4587, stackpage=cd09b000)
Stack: dfe7ecc0 00000000 c026c6ae 00008801 c0134d99 d2d2c480 cf551cc0 080bbee6
00000000 cf5fa2ec d2d2c480 d2d2c49c c011cd02 d2d2c480 cf551cc0 080bbee6
dfe7ecc0 00000000 df890dc0 dfe7ecc8 c026d3da 00008801 cd09bec8 c158c640
Call Trace: [<c026c6ae>] [<c0134d99>] [<c011cd02>] [<c026d3da>] [<c0162331>]
[<c015856c>] [<c019fdca>] [<c0158929>] [<c014bb65>] [<c0149a03>] [<c0149928>]
[<c0149d1b>] [<c010963f>]
Code: 0f bf 42 10 39 d8 74 12 8b 92 b4 00 00 00 85 d2 75 ee 31 c9Error (pclose_local): Oops_decode_part pclose failed 0xb Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.wreYXM
Quoted 5 lines
Quoted 5 lines
EIP;
c026ba16<get_tty_driver+16/50> <=====edx;
e0d5fc60<[tuner].data.end+5245/f645>
ebp;dfe7ecc8<_end+1f9ab184/2074351c>
esp;cd09be58<_end+cbc8314/2074351c>
Trace; c026c6ae <init_dev+1e/4b0>
Trace; c0134d99 <handle_mm_fault+69/a0>
Trace; c011cd02 <do_page_fault+142/4e0>
Trace; c026d3da <tty_open+6a/430>
Trace; c0162331 <dput+21/150>
Trace; c015856c <link_path_walk+4dc/640>
Trace; c019fdca <devfs_open+19a/230>
Trace; c0158929 <path_lookup+39/40>
Trace; c014bb65 <get_empty_filp+65/1a0>
Trace; c0149a03 <dentry_open+d3/1e0>
Trace; c0149928 <filp_open+68/70>
Trace; c0149d1b <sys_open+5b/e0>
Trace; c010963f <system_call+33/38>
Unable to handle kernel paging request at virtual address e0d5fc70
c026ba16
*pde = 1f763067
Oops: 0000
CPU: 0
EIP: 0010:[<c026ba16>] Tainted: PF
EFLAGS: 00010286
eax: 00008801 ebx: 00000088 ecx: 00008802 edx: e0d5fc60
esi: 00000001 edi: 00008801 ebp: dfe7ecc8 esp: cd09be58
ds: 0018 es: 0018 ss: 0018
Process usb.rc (pid: 4588, stackpage=cd09b000)
Stack: dfe7ecc0 00000000 c026c6ae 00008801 c0134d99 d2d2c480 cf54fa40 080bbee6
00000000 cf5fb2ec d2d2c480 d2d2c49c c011cd02 d2d2c480 cf54fa40 080bbee6
dfe7ecc0 00000000 df890dc0 dfe7ecc8 c026d3da 00008801 cd09bec8 c158c640
Call Trace: [<c026c6ae>] [<c0134d99>] [<c011cd02>] [<c026d3da>] [<c0162331>]
[<c015856c>] [<c019fdca>] [<c0158929>] [<c014bb65>] [<c0149a03>] [<c0149928>]
[<c0149d1b>] [<c010963f>]
Code: 0f bf 42 10 39 d8 74 12 8b 92 b4 00 00 00 85 d2 75 ee 31 c9Error (pclose_local): Oops_decode_part pclose failed 0xb Error (Oops_decode_part): no objdump lines read for /tmp/ksymoops.Zh8GNM
Quoted 5 lines
Quoted 5 lines
EIP;
c026ba16<get_tty_driver+16/50> <=====edx;
e0d5fc60<[tuner].data.end+5245/f645>
ebp;dfe7ecc8<_end+1f9ab184/2074351c>
esp;cd09be58<_end+cbc8314/2074351c>
Trace; c026c6ae <init_dev+1e/4b0>
Trace; c0134d99 <handle_mm_fault+69/a0>
Trace; c011cd02 <do_page_fault+142/4e0>
Trace; c026d3da <tty_open+6a/430>
Trace; c0162331 <dput+21/150>
Trace; c015856c <link_path_walk+4dc/640>
Trace; c019fdca <devfs_open+19a/230>
Trace; c0158929 <path_lookup+39/40>
Trace; c014bb65 <get_empty_filp+65/1a0>
Trace; c0149a03 <dentry_open+d3/1e0>
Trace; c0149928 <filp_open+68/70>
Trace; c0149d1b <sys_open+5b/e0>
Trace; c010963f <system_call+33/38>