Skip to contentSkip to conversation

R: Re: Strange arm9 behaviour reading long(s) not aligned to 4 bytes boundary

U-Boot dibacco at libero.it 3 participants 3 messages Jan 25, 2009

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines
Quoted 2 lines

I have something like this on a 32 bit little endian arm9 board (SAM9

L9260):

Quoted 4 lines
Quoted 4 lines

char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };

long A = * (

(long*)

Quoted 4 lines
Quoted 4 lines

buffer );
long B = * ( (long*) (buffer + 2) );

printf("A: %

08x B: %08x", A,

Quoted 3 lines
Quoted 3 lines

B);

I would expect that A = 0x03020100 and B =

0x05040302

Quoted 2 lines
Quoted 2 lines

instead I get the
right value for A but B is 0x01000302 or

something like this but anyway not

Quoted 2 lines
Quoted 2 lines

what I expect.
Is there something

wrong on the board? It seems that only 4

Quoted 1 line
Quoted 1 line

bytes aligned long are read

correctly.

Quoted 5 lines

ARM9 does not support unaligned load/store. Yours is apparently

configured in the round-and-rotate mode.
e

Then my code is simply wrong, that
is, not allowed? If I have to port code from a PPC (that handles unaligned accesses)
to an ARM9 it is painful operation..., isn't it?

Bye,
Antonio.

#1 lore raw

Dear Antonio,

Quoted 2 lines · In message <10799135.81041232909531093.JavaMail.defaultUser@defaultHost> you…

Then my code is simply wrong, that

Basicly, yes.

Quoted 2 lines

is, not allowed? If I have to port code from a PPC (that handles unaligned accesses)

...then you should fix the PPC code as well.

Quoted 1 line

to an ARM9 it is painful operation..., isn't it?

This has nothing to do with ARM.

Porting broken code is always a pain, though.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The use of Microsoft crippleware systems is a sin that  carries  with
it its own punishment.
         -- Tom Christiansen in <[email protected]>
#2 lore raw
In reply to dibacco at libero.it
Quoted 15 lines · dibacco at libero.it
Quoted 15 lines
Quoted 14 lines

I have something like this on a 32 bit little endian arm9 board (SAM9L9260):

char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };

long A = * ( (long*) buffer );
long B = * ( (long*) (buffer + 2) );

printf("A: %08x B: %08x", A, B);

I would expect that A = 0x03020100 and B = 0x05040302 instead I get the right value for A but B is 0x01000302 or something like this but anyway not what I expect. Is there something wrong on the board? It seems that only 4 bytes aligned long are read correctly.

Quoted 7 lines
Quoted 4 lines

ARM9 does not support unaligned load/store. Yours is apparently

configured in the round-and-rotate mode.

Then my code is simply wrong, that is, not allowed? If I have to port code from a PPC (that handles unaligned accesses) to an ARM9 it is painful operation..., isn't it?

If your code relies on unaligned memory accesses, then yes, making it run on an ARM9 might not be much fun. I would suggest you set the processor to trap on unaligned accesses (the manual will tell you how). That should make it easier to find them all.

Signature · 2 lines
M?ns Rullg?rd
mans at mansr.com