Process table time incorrect after ACPI/APM resume
System:
SuSE 9.0 pro.
Linux 2.6.4 #1 Fri Mar 12 01:01:06 SAST 2004 i686 i686 i386 GNU/Linux. IBM Thinkpad R50P, Intel 82855PM, Centrino 1.7 GHz.
Problem:
After ACPI/APM suspend-to-ram, process table times are wrong.
Symptoms:
After 1st resume, process table times were about 5 seconds slower than the actual system time. I initially noticed this using ACPI, but can confirm that the same happens under APM!
After repeating the suspend/resume thing:
ksyrium:~ # ps -ef|grep nothing
root 2288 1550 0 12:24 pts/34 00:00:00 grep nothing
ksyrium:~ # date
Thu Mar 18 12:26:41 SAST 2004
ksyrium:~ # ps -ef|grep nothing
root 2291 1550 0 12:24 pts/34 00:00:00 grep nothing
ksyrium:~ # date
Thu Mar 18 12:26:50 SAST 2004
ksyrium:~ # ps -ef|grep nothing
root 2294 1550 0 12:24 pts/34 00:00:00 grep nothing
ksyrium:~ # date
Thu Mar 18 12:26:53 SAST 2004
ksyrium:~ # ps -ef|grep nothing
root 2350 1550 0 12:31 pts/34 00:00:00 grep nothing
ksyrium:~ # date
Thu Mar 18 12:33:50 SAST 2004
The process table times are slowed significantly,
but not to a complete standstill afer resuming under BOTH power management systems.
Surely this is not correct/sane? I couldn't find any more info at the usual places googling/bugzilla.
Niel
Relevant options:CONFIG_X86_TSC=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_HANGCHECK_TIMER is not set CONFIG_SND_RTCTIMER=m
# Power management options (ACPI, APM)
# APM (Advanced Power Management) BIOS Support CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=yCONFIG_APM_CPU_IDLE=yCONFIG_APM_DISPLAY_BLANK=yCONFIG_APM_RTC_IS_GMT=yCONFIG_APM_ALLOW_INTS=y
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support CONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_INTERPRETER=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=mCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_THERMAL=mCONFIG_ACPI_ASUS=mCONFIG_ACPI_TOSHIBA=mCONFIG_ACPI_DEBUG=yCONFIG_ACPI_BUS=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_SERIAL_8250_ACPI is not set