new package not built, AR prefix not passed to make
Hi Builders,
I am facing two basic issues after adding a new library to buildroot:
1. "make" does not build it
---------------------------
What I did can be summed up in these files:
$ grep company package/Config.in source "package/company/Config.in"
$ cat package/company/libfpga/Config.in config BR2_PACKAGE_COMPANY_LIBFPGA bool "libfpga" select BR2_TOOLCHAIN_USES_GLIBC help library providing access to FPGA functions
$ cat package/company/company.mk include $(sort $(wildcard package/company/*/*.mk))
$ cat package/company/libfpga/libfpga.mk ################################################################################ # # libfpga # ################################################################################
LIBFPGA_VERSION = 1.0 LIBFPGA_SOURCE = libfpga-$(LIBFPGA_VERSION).tar.gz LIBFPGA_SITE = $(TOPDIR)/../libfpga/ LIBFPGA_SITE_METHOD = local
LIBFPGA_INSTALL_STAGING = YES
# defaults to YES LIBFPGA_INSTALL_TARGET = YES LIBFPGA_DEPENDENCIES = glibc #LIBFPGA_CONFIG_SCRIPTS =
define LIBFPGA_BUILD_CMDS
$(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all
endef
$(eval $(generic-package))$ grep COMPANY .config BR2_PACKAGE_COMPANY=y BR2_PACKAGE_COMPANY_LIBFPGA=y
$ make (no luck)
Does anyone see what I am missing here?
2. AR cross-prefix is not passed by buildroot to make
-----------------------------------------------------
I can build my package manually though:
$ make libfpga
Quoted 1 line
Quoted 1 line
Quoted 1 line
libfpga 1.0 Syncing from source dir
/home/evigier/buildroot-2013.11/../libfpga/
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr --exclude CVS /home/evigier/buildroot-2013.11/../libfpga// /home/evigier/buildroot-2013.11/output/build/libfpga-1.0
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
libfpga 1.0 Configuring
libfpga 1.0 Building
/usr/bin/make -j5 CC="/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-gcc" LD="/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-ld" -C /home/evigier/buildroot-2013.11/output/build/libfpga-1.0 all make[1]: Entering directory `/home/evigier/buildroot-2013.11/output/build/libfpga-1.0'
ar rcs libfpga.a fpga.o/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-gcc -shared -o libfpga.so fpga.o
make[1]: Leaving directory `/home/evigier/buildroot-2013.11/output/build/libfpga-1.0'
Why is AR prefix not passed to make here? Is this related to the generic-package?
Thanks,
Emeric
Quoted 2 lines
Why is AR prefix not passed to make here? Is this related to the generic-package?
I believe I found part of my answer on gnu.org libc manual:
You may need to set AR to cross-compiling versions of ar if the native tools are not configured to work with object files for the target you configured for.
$ ar --help [...] ar: supported targets: elf64-x86-64 elf32-i386 elf32-x86-64 a.out-i386-linux pei-i386 pei-x86-64 elf64-l1om elf64-k1om elf64-little elf64-big elf32-little elf32-big plugin srec symbolsrec verilog tekhex binary ihex
So I guess buildroot makes such a sanity check, right?
Quoted 7 lines · ?meric Vigier
Quoted 2 lines
Why is AR prefix not passed to make here? Is this related to the generic-package?
I believe I found part of my answer on gnu.org libc manual:
You may need to set AR to cross-compiling versions of ar if the native tools are not configured to work with object files for the target you configured for.
Quoted 5 lines
$ ar --help [...] ar: supported targets: elf64-x86-64 elf32-i386 elf32-x86-64 a.out-i386-linux pei-i386 pei-x86-64 elf64-l1om elf64-k1om elf64-little elf64-big elf32-little elf32-big plugin srec symbolsrec verilog tekhex binary ihexSo I guess buildroot makes such a sanity check, right?
You just need to use $(TARGET_AR) the same way you're using $(TARGET_CC) and others.
Snip:
define LIBFPGA_BUILD_CMDS
$(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" \
AR="$(TARGET_AR)" -C $(@D) allendef
Or better still what usually works...
$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
Regards.
----- Mail original -----
Quoted 25 lines · ?meric Vigier
Quoted 10 lines
Quoted 3 lines
Why is AR prefix not passed to make here? Is this related to the generic-package?
I believe I found part of my answer on gnu.org libc manual:
You may need to set AR to cross-compiling versions of ar if the native tools
are not configured to work with object files for the target you configured for.Quoted 8 lines
$ ar --help [...] ar: supported targets: elf64-x86-64 elf32-i386 elf32-x86-64 a.out-i386-linux pei-i386 pei-x86-64 elf64-l1om elf64-k1om elf64-little elf64-big elf32-little elf32-big plugin srec symbolsrec verilog tekhex binary ihexSo I guess buildroot makes such a sanity check, right?
You just need to use $(TARGET_AR) the same way you're using $(TARGET_CC)
and others.
Snip:
Quoted 4 lines
define
LIBFPGA_BUILD_CMDS$(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" \ AR="$(TARGET_AR)" -C $(@D) allendef
Stupid me, thanks!
Quoted 7 lines
Or better still what usually works...
$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)Regards.
Hi Emeric,
Quoted 11 lines · ?meric Vigier
Hi Builders,
I am facing two basic issues after adding a new library to buildroot:
1. "make" does not build it
---------------------------
What I did can be summed up in these files:$ grep company package/Config.in source "package/company/Config.in"
Quoted 7 lines
$ cat package/company/libfpga/Config.in
config BR2_PACKAGE_COMPANY_LIBFPGA
bool "libfpga"
select BR2_TOOLCHAIN_USES_GLIBC
help
library providing access to FPGA functionsDon't you also need a package/company/Config.in then, with the following content :
menu "Company-specific packages"
source "package/company/libfpga/Config.in"
endmenu
?
Quoted 59 lines
$ cat package/company/company.mk include $(sort $(wildcard package/company/*/*.mk))$ cat package/company/libfpga/libfpga.mk ################################################################################ # # libfpga # ################################################################################LIBFPGA_VERSION = 1.0 LIBFPGA_SOURCE = libfpga-$(LIBFPGA_VERSION).tar.gz LIBFPGA_SITE = $(TOPDIR)/../libfpga/ LIBFPGA_SITE_METHOD = local
LIBFPGA_INSTALL_STAGING= YES# defaults to YES LIBFPGA_INSTALL_TARGET = YES LIBFPGA_DEPENDENCIES = glibc #LIBFPGA_CONFIG_SCRIPTS =define LIBFPGA_BUILD_CMDS $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_LD)" -C $(@D) all endef $(eval $(generic-package))$ grep COMPANY .config BR2_PACKAGE_COMPANY=y BR2_PACKAGE_COMPANY_LIBFPGA=y$ make (no luck)Does anyone see what I am missing here?
2. AR cross-prefix is not passed by buildroot to make
-----------------------------------------------------
I can build my package manually though:$ make libfpgaQuoted 1 line
Quoted 1 line
Quoted 1 line
libfpga 1.0 Syncing from source dir
/home/evigier/buildroot-2013.11/../libfpga/rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr --exclude CVS
/home/evigier/buildroot-2013.11/../libfpga///home/evigier/buildroot-2013.11/output/build/libfpga-1.0Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
libfpga 1.0 Configuring
libfpga 1.0 Building
/usr/bin/make-j5 CC="/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-gcc" LD="/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-ld" -C/home/evigier/buildroot-2013.11/output/build/libfpga-1.0all make[1]: Entering directory `/home/evigier/buildroot-2013.11/output/build/libfpga-1.0'
ar rcs libfpga.a fpga.o/home/evigier/buildroot-2013.11/output/host/usr/bin/powerpc-buildroot-linux-gnu-gcc-shared -o libfpga.so fpga.o
make[1]: Leaving directory `/home/evigier/buildroot-2013.11/output/build/libfpga-1.0'Why is AR prefix not passed to make here? Is this related to the generic-package?
Thanks,
Emeric
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Hi Lionel,
----- Mail original -----
Quoted 24 lines
Hi Emeric,
Quoted 12 lines · ?meric Vigier
Hi Builders,
I am facing two basic issues after adding a new library to buildroot:
1. "make" does not build it
---------------------------
What I did can be summed up in these files:$ grep company package/Config.in source "package/company/Config.in"Quoted 7 lines
$ cat package/company/libfpga/Config.in config BR2_PACKAGE_COMPANY_LIBFPGA bool "libfpga" select BR2_TOOLCHAIN_USES_GLIBC help library providing access to FPGA functions
Quoted 8 lines
Don't you also need a package/company/Config.in then, with the following content :
menu "Company-specific packages"
source "package/company/libfpga/Config.in"
endmenu?
I forgot to dump it in my email, but I wrote it as follows:
$ cat package/company/Config.in menuconfig BR2_PACKAGE_COMPANY bool "Company Library and embedded tools" help Company Library and embedded tools
if BR2_PACKAGE_COMPANY
source "package/company/libfpga/Config.in"
endif # BR2_PACKAGE_COMPANY
I also tried with your syntax, no luck.
My Config.in are sane I believe. I can see all the required options in menuconfig And they end up in .config correctly.
Regards,
Emeric
On 03/04/14 17:32, ?meric Vigier wrote:
[snip]
Quoted 2 lines
$ cat package/company/libfpga/Config.in config BR2_PACKAGE_COMPANY_LIBFPGA
Either the symbol should be BR2_PACKAGE_LIBFPGA, or the directory should
be package/company/company-libfpga (and the .mk file package/company/company-libfpga/company-libfpga.mk).
Regards,
Arnout
[snip]
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Quoted 48 lines · ?meric Vigier
Hi Lionel,
----- Mail original -----
Quoted 24 lines
Hi Emeric,
Quoted 12 lines · ?meric Vigier
Hi Builders,
I am facing two basic issues after adding a new library to buildroot:
1. "make" does not build it
---------------------------
What I did can be summed up in these files:$ grep company package/Config.in source "package/company/Config.in"Quoted 7 lines
$ cat package/company/libfpga/Config.in config BR2_PACKAGE_COMPANY_LIBFPGA bool "libfpga" select BR2_TOOLCHAIN_USES_GLIBC help library providing access to FPGA functionsQuoted 8 lines
Don't you also need a package/company/Config.in then, with the following content :
menu "Company-specific packages"
source "package/company/libfpga/Config.in"
endmenu?
I forgot to dump it in my email, but I wrote it as follows:
$ cat package/company/Config.in menuconfig BR2_PACKAGE_COMPANY bool "Company Library and embedded tools" help Company Library and embedded toolsif
BR2_PACKAGE_COMPANY
source "package/company/libfpga/Config.in"
endif #BR2_PACKAGE_COMPANY
Quoted 6 lines
I also tried with your syntax, no luck.
My Config.in are sane I believe. I can see all the required options in menuconfig And they end up in .config correctly.Regards,
Emeric
You may also want to check if the libfpga buld folder already exists, and stamps in it, in doubt you can try
rm -r output/build/libfpga-1.0
Cheers
----- Mail original -----
Quoted 7 lines
De: "Arnout Vandecappelle" <[email protected]>
?: "?meric Vigier" <[email protected]>, buildroot at busybox.net Envoy?: Vendredi 4 Avril 2014 01:30:09
Objet: Re: [Buildroot] new package not built, AR prefix not passed to makeOn 03/04/14 17:32, ?meric Vigier wrote:
[snip]
Quoted 7 lines
Quoted 2 lines
$ cat package/company/libfpga/Config.in config BR2_PACKAGE_COMPANY_LIBFPGAEither the symbol should be
BR2_PACKAGE_LIBFPGA, or the directory should
be package/company/company-libfpga (and the .mk filepackage/company/company-libfpga/company-libfpga.mk).
This is it, thanks!
Quoted 3 lines
Regards,
Arnout