Skip to contentSkip to conversation

Sensors (W83627HF) in Tyan S2882

DISCUSSION Jean Delvare 1 participant 1 message Apr 20, 2004

lore
Share & tools
lore
#0 lore raw

Hi Jan,

Quoted 3 lines

Yes, I had CONFIG_SENSORS_W83781D=y. I have recompiled with CONFIG_SENSORS_W83627HF=y and without CONFIG_SENSORS_W83781D, but the new kernel still can see only three fans.

I think you need to include the w83627hf driver (for the Winbond W83627HF chip) and the lm85 driver (for the Analog Devices ADM1027 chip). Don't forget to include the i2c-amd756 and i2c-amd8111 drivers as well, since the ADM1027 chip has to be connected to either of these busses.

Hope that helps.

Signature · 2 lines
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/