IPMI SEL Event ID
HI All,
I find the new SEL event ID is not from base number(1) after I run "ipmitool sel clear" command. Is it the OpenBMC default design rule ? If not, any plan to fix the issue?
Thanks
Quoted 7 lines · On 9/22/2019 5:19 AM, Yonghui YH21 Liu wrote:
HI All,
I find the new SEL event ID is not from base number(1) after I
run “ipmitool sel clear” command.Is it the OpenBMC default design rule ? If not, any plan to
fix the issue?
If you are using phosphor-sel-logger, it is a bug. The fix for it is up for review here: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-sel-logger/+/24843
Thanks!
-Jason
Quoted 3 lines
Thanks
Hi Jason,
New SEL ID is still not from base number(1) after "sel clear" command with the fix you provided. Is there any setting I need to notice that?
Please help to advise it.
Thanks,
Ivan
Quoted 27 lines
-----Original Message-----
From: openbmc <[email protected]> On Behalf Of Bills, Jason M
Sent: Tuesday, September 24, 2019 1:36 AM
To: [email protected]
Subject: [External] Re: IPMI SEL Event IDQuoted 7 lines · On 9/22/2019 5:19 AM, Yonghui YH21 Liu wrote:
HI All,
I find the new SEL event ID is not from base number(1) after
I run "ipmitool sel clear" command.Is it the OpenBMC default design rule ? If not, any plan to
fix the issue?If you are using phosphor-sel-logger, it is a bug. The fix for it is up for review here:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-sel-logger/+/24843Thanks!
-JasonQuoted 3 lines
Thanks
Quoted 5 lines · On 10/15/2019 3:11 AM, Ivan Li11 wrote:
Hi Jason,
New SEL ID is still not from base number(1) after "sel clear" command with the fix you provided. Is there any setting I need to notice that?
Please help to advise it.
Do you use rsyslog files or DBus entries for the SEL log? The fix I made works only for rsyslog files by checking if the files have been deleted (after a SEL Clear) and resets to 1 if they have.
If you are using DBus for SEL log entries, then the logic to initialize and increment the SEL Record ID will need to be updated to also check DBus.
Thanks,
-Jason
Quoted 30 lines
Thanks,
IvanQuoted 27 lines
-----Original Message-----
From: openbmc <[email protected]> On Behalf Of Bills, Jason M
Sent: Tuesday, September 24, 2019 1:36 AM
To: [email protected]
Subject: [External] Re: IPMI SEL Event IDQuoted 7 lines · On 9/22/2019 5:19 AM, Yonghui YH21 Liu wrote:
HI All,
I find the new SEL event ID is not from base number(1) after
I run "ipmitool sel clear" command.Is it the OpenBMC default design rule ? If not, any plan to
fix the issue?If you are using phosphor-sel-logger, it is a bug. The fix for it is up for review here:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-sel-logger/+/24843Thanks!
-JasonQuoted 3 lines
Thanks