usb_hcd_irq, nobody cared on 2.6.6
Hi,
Few minutes after boot I found that in my logs :
irq 10: nobody cared!
Call Trace: [<c01063aa>] __report_bad_irq+0x2a/0x90 [<c01064a0>] note_interrupt+0x70/0xb0 [<c0106751>] do_IRQ+0x111/0x120 [<c010497c>] common_interrupt+0x18/0x20 [<c0101f40>] default_idle+0x0/0x40 [<c0101f6c>] default_idle+0x2c/0x40 [<c0101ffb>] cpu_idle+0x3b/0x50 [<c0119eb2>] printk+0x192/0x1c0
handlers:
[<f99efe80>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<f99efe80>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ #10
Here is cat /proc/interrupts :
CPU0 CPU1
0: 23928959 23883721 IO-APIC-edge timer 1: 2082 1731 IO-APIC-edge i8042 8: 3 1 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 10: 40387 59613 IO-APIC-level uhci_hcd, uhci_hcd 12: 44370 57657 IO-APIC-edge i8042 14: 1284 1029 IO-APIC-edge ide0 16: 4384837 220 IO-APIC-level eth0, radeon@PCI:1:0:0 18: 409701 397459 IO-APIC-level sym53c8xx, sym53c8xx 19: 31024 34528 IO-APIC-level EMU10K1 NMI: 0 0 LOC: 47813934 47813970 ERR: 0 MIS: 543
The same kind of problem hapenned with 2.6.5 too.
My mouse is ps2. The only connected usb device right now is an ipaq craddle. If I remove it and reboot with my digital camera (usb storage) connected, I've got the same problem.
lspci output follows :
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) 0000:00:09.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) 0000:00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) 0000:00:0b.0 Ethernet controller: Winbond Electronics Corp W89C940 (rev 0b)
0000:00:0c.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless Interface 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
man, 10.05.2004 kl. 22.53 +0200, skrev Thomas Cataldo:
Quoted 5 lines
Hi,
Few minutes after boot I found that in my logs :
irq 10: nobody cared!
[snip]
Quoted 1 line
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
This is a problem with all Apollo Pro 133/266/MVP3 it seems. Check
http://bugzilla.kernel.org/show_bug.cgi?id=2243 and see if you have the same symptoms.
Best regards,
Stian