http bandwidth control
Hi
I'm newbie on this and i would appreciate some pointers on how to limit the http trafic to my users from my linux-gateway box.
Thanx in advance
Signature · 6 lines
Guillermo Gomez <[email protected]> neotech _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Guillermo Gomez
Hi
I'm newbie on this and i would appreciate some pointers on how to limit the http trafic to my users from my linux-gateway box.
Thanx in advance
Signature · 18 lines
Guillermo Gomez <[email protected]> neotech _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^^^^^^^^^^^^^^^^ Try the HOWTO? -- Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
If you're only trying to limit http data use the squid proxy server with delay pools:
My delay pools config for the squid proxy server:
acl only64kusers src 192.168.40.0/255.255.255.0
acl geoff src 192.168.40.198
acl joel src 192.168.40.188
acl ellen src 192.168.40.197
acl jonolaptop src 192.168.40.192
delay_pools 2delay_class 1 3delay_access 1 allow only64kusers !jonolaptop !geoff !ellen !joel delay_access 1 deny alldelay_parameters 1 128000/128000 -1/-1 24000/24000
delay_class 2 3delay_access 2 allow geoff ellen joel jonolaptop !only64kusers delay_access 2 deny alldelay_parameters 2 192000/192000 -1/-1 192000/192000
This config mean that everyone except jonolaptop, geoff, ellen and joel is restricted to a pool of 128 k/s where each connection can only use 24 k/s
And the next delay class means that jonolaptop, geoff, ellen and joel can use 192 k/s all the time from a pool of 192 k/s
Hope it helps
-Joel
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Boxman
Sent: Wednesday, 23 June 2004 3:38 PM
To: [email protected]
Subject: [general] Re: [LARTC] http bandwidth control
Quoted 6 lines · Guillermo Gomez
Hi
I'm newbie on this and i would appreciate some pointers on how to limit the http trafic to my users from my linux-gateway box.
Thanx in advance
Signature · 23 lines
Guillermo Gomez <[email protected]> neotech _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^^^^^^^^^^^^^^^^ Try the HOWTO? -- Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/