classifying packets
hello!
i have the following problem:
i have a pc, which has one (eth0) NIC. eth0 is connected to two other linux machines acting as routers to the internet.
i want to classify packets outgoing from my PC. i want to mark packets that are routed through 1. router with mark 1 and the others packets routed throuhg router 2. with mark 2.
i had following ideas:
-using destination MAC
-using route realms (but routes are generated using quagga and it does not support realms)
-using 2 NICs, (but i can't use 2 NICs)
thanks
Matis
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
VLAN?
Quoted 18 lines · [email protected] wrote:
hello!
i have the following problem:
i have a pc, which has one (eth0) NIC. eth0 is connected to two other linux machines acting as routers to the internet.
i want to classify packets outgoing from my PC. i want to mark packets that are routed through 1. router with mark 1 and the others packets routed throuhg router 2. with mark 2.i had following ideas:
(quoted diff) +0
-2-using destination MAC -using route realms (but routes are generated using quagga and it does notsupport realms)
-using 2 NICs, (but i can't use 2 NICs)thanks
Quoted 7 lines
Matis
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/