Skip to contentSkip to conversation

CISCO with xot

DISCUSSION Andrew Hendry 2 participants 2 messages Aug 29, 2004 – Aug 30, 2004 X.25 stack

lore
Share & tools
lore

Andrew Hendry

author
#0 lore raw

Is there any patch to use xotd with PVC ?

For xotd with PVCs I dont know of a patch, its in the TODO for xotd. Would having the PVC's on the router x25 side and just have xotd like normal on the ip side do what you need?

With the diagram below:
- You could use IP over x25 on the x25 side of the router and have the applications on both hosts use IP.
or
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080094a46.shtml

Andrew.

Quoted 12 lines · Frederico Faria

Hi,

Is somebody using CISCO routers ?!
Today I use xotd with CISCO. Is there any configuration for the
CISCO routers TCP/IP ( pure, without xotd ) to X25 ? As below:

              Host-----> TCP/IP ----> CISCO ---> X25 --->Host

Thank you.

Frederico Faria

#1 lore raw

Hello Andrew and Frederico:

Even if there were (a patch for xotd and PVCs), it wouldn't do any good. As far as I know, the public domain X.25 that comes with Linux doesn't support PVCs.

If you want to run PVCs over an IP network, we offer a solution based on an embedded (diskless, fanless) device on one side of the network (next to the host that has only an X.25 interface), and an X.25 API library that interfaces with TCP/IP at the other. (we're one of those "non-free" vendors that Frederico refers to in an earlier post to the list). Drop me a line by e-mail if you'd like to know more.

Derek

Quoted 39 lines · Andrew Hendry

Is there any patch to use xotd with PVC ?

For xotd with PVCs I dont know of a patch, its in the TODO for xotd. Would having the PVC's on the router x25 side and just have xotd like normal on the ip side do what you need?

With the diagram below:
- You could use IP over x25 on the x25 side of the router and have the applications on both hosts use IP.
or
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080094a46.shtml

Andrew.

Quoted 7 lines · Frederico Faria

Hi,

Is somebody using CISCO routers ?!
Today I use xotd with CISCO. Is there any configuration for the
CISCO routers TCP/IP ( pure, without xotd ) to X25 ? As below:

Quoted 7 lines
             Host-----> TCP/IP ----> CISCO ---> X25 --->Host

Thank you.

Frederico Faria

-
To unsubscribe from this list: send the line "unsubscribe linux-x25" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 5 lines
Derek Vair
The Software Group Limited        Tel:    +1(705)725-9999x22
642 Welham Road			    Fax:    +1(705)725-9666
Barrie, Ontario			    e-mail: [email protected]
Canada L4N 9A1			    web:    www.wanware.com