Skip to contentSkip to conversation

mdadm create error

DISCUSSION rich turner 3 participants 3 messages Sep 23, 2004 – Sep 24, 2004 MD RAID

lore
Share & tools
lore
#0 lore raw

i cant figure out what is wrong with the following command. when i remove the "parity=right-asymmetric" command option it does not fail. but i need to be able to create the raid device with different parity algorithms. it also fails on --level=5 and using the short forms of the flags.

mdadm --create /dev/md2 --chunk=64 --level=6 --raid-devices=4 --parity=right-asymmetric --spare-devices=2 /dev/vg0/turnerlv1 /dev/vg0/turnerlv2 /dev/vg0/turnerlv3 /dev/vg0/turnerlv4 /dev/vg0/turnerlv5 /dev/vg0/turnerlv6

mdadm: layout may only be sent once. Second value was right-asymmetric

rich:/tmp # mdadm --version
mdadm - v1.5.0 - 22 Jan 2004

#1 lore raw

It works for me with RAID5. Maybe RAID6 does not support all of the parity options. My version of md does not support RAID6, so I can't even try it.

Oh! When I "play" with md and mdadm I use the ram disks. But don't expect the data to be there after a re-boot! You can fail a drive and hot add and remove.

Guy

root]# mdadm --create /dev/md3 --chunk=64 --level=5 --raid-devices=4 --parity=right-asymmetric --spare-devices=2 /dev/ram0 /dev/ram1 /dev/ram2 /dev/ram3 /dev/ram4 /dev/ram5
mdadm: array /dev/md3 started.
[root@watkins-home root]# cat /proc/mdstat
Personalities : [raid1] [raid5]
read_ahead 1024 sectors
md3 : active raid5 [dev 01:03][3] [dev 01:05][5] [dev 01:04][4] [dev 01:02][2] [dev 01:01][1] [dev 01:00][0]

      12096 blocks level 5, 64k chunk, algorithm 1 [4/4] [UUUU]

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of rich turner
Sent: Thursday, September 23, 2004 1:42 PM
To: [email protected]
Subject: mdadm create error

i cant figure out what is wrong with the following command. when i remove the "parity=right-asymmetric" command option it does not fail. but i need to be able to create the raid device with different parity algorithms. it also fails on --level=5 and using the short forms of the flags.

mdadm --create /dev/md2 --chunk=64 --level=6 --raid-devices=4 --parity=right-asymmetric --spare-devices=2 /dev/vg0/turnerlv1 /dev/vg0/turnerlv2 /dev/vg0/turnerlv3 /dev/vg0/turnerlv4 /dev/vg0/turnerlv5 /dev/vg0/turnerlv6

mdadm: layout may only be sent once. Second value was right-asymmetric

rich:/tmp # mdadm --version
mdadm - v1.5.0 - 22 Jan 2004

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to rich turner
Quoted 6 lines · On Thursday September 23, [email protected] wrote:

i cant figure out what is wrong with the following command. when i remove the "parity=right-asymmetric" command option it does not fail. but i need to be able to create the raid device with different parity algorithms. it also fails on --level=5 and using the short forms of the flags.

Quoted 7 lines

mdadm --create /dev/md2 --chunk=64 --level=6 --raid-devices=4 --parity=right-asymmetric --spare-devices=2 /dev/vg0/turnerlv1 /dev/vg0/turnerlv2 /dev/vg0/turnerlv3 /dev/vg0/turnerlv4 /dev/vg0/turnerlv5 /dev/vg0/turnerlv6

mdadm: layout may only be sent once. Second value was right-asymmetric

There is a bug in 1.5.0 and 1.6.0 that prevents the --parity option
from working. It is fixed in 1.7.0.

NeilBrown

Quoted 8 lines

rich:/tmp # mdadm --version
mdadm - v1.5.0 - 22 Jan 2004

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html