Skip to contentSkip to conversation

help: images in example directory are invalid

U-Boot-Users Benjamin Collar 2 participants 2 messages Sep 30, 2004

lore
Share & tools
lore
#0 lore raw

Greetings folks

As I've mentioned, u-boot is running on the board now. However, I've so far failed to get a stand-alone application to run. For instance, when I load hello_world.srec, then check it with iminfo, I get "bad magic number".

Using mkimage -l hello_world.srec, I get 'Bad Magic Number:
"hello_world.srec" is no valid image' I get the same result for hello_world (the elf format).

Using powerpc-linux-objdump -fs hello_world.srec, I see:

hello_world.srec: file format srec
architecture: UNKNOWN!, flags 0x00000000:

start address 0x00040004

Contents of section .sec1:

 40000 000182b0 9421ffd8 7c0802a6 429f0005  .....!..|...B...
 40010 bf610014 7fc802a6 9001002c 801efff0  .a.........,....
 40020 7c7c1b78 7fc0f214 7c832378 7c9b2378  ||.x....|.#x|.#x

Can anyone explain why u-boot is building invalid images?

Thanks
Ben

Signature · 5 lines
Benjamin Collar
Siemens AG
CT SE 2
Embedded Linux
089-636-53711
#1 lore raw

Re your subject: No, they are not.

Quoted 5 lines · In message <1096540775.5348.38.camel@mhpajh5c> you wrote:

As I've mentioned, u-boot is running on the board now. However, I've so far failed to get a stand-alone application to run. For instance, when I load hello_world.srec, then check it with iminfo, I get "bad magic number".

What makes you think that a stand-alone application should have a valid header? Did you use mkimage to build it?

Quoted 3 lines

Using mkimage -l hello_world.srec, I get 'Bad Magic Number:
"hello_world.srec" is no valid image' I get the same result for hello_world (the elf format).

Of course.

Quoted 1 line

Can anyone explain why u-boot is building invalid images?

These are vaid images. They just don't have a U-Boot image header as you didn't add one.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
He who hesitates is not only lost, but miles from the next exit.