2.4 lockup issue (flush_tlb_all)
Hello,
We are experiencing some lockup problems with our SMP configuration. Here are the details :
- The computers lockup with no relevant logs.
- The kernel still replies to ping but higher level services are not responding.
- After few hours (5-8), the kernel answers again and the load is around 40 then decreasing.
We manage to get some SysRq showPc output (screenshot :
http://www.elonex.ch/shot/)
According to the basic sysreq debugging, the problem seems to be related to the function flush_tlb_all, and it is triggered with a write or read (local or on nfs sometimes).
I looked at the LKML, and didn't find any known issues. Maybe it has been corrected but not backported by redhat ! I'll appreciate any help.
Thank you in advance.
detailed configuration :
---------------
Processor : 2 x 2.8Ghz Pentium Xeon
Motherboard : Intel se7501cw2
Memory : 4 x 512MB DDR 266 ECC registered
Kernel : 2.4.20-31 (Redhat 7.3 with updates)
PLEASE CC the answers/comments
Signature · 3 lines
Thomas OULEVEY System Engineer Elonex Switzerland Email: [email protected] Switzerland
Quoted 20 lines · Thomas Oulevey
Hello,
We are experiencing some lockup problems with our SMP configuration. Here are the details :
- The computers lockup with no relevant logs.
- The kernel still replies to ping but higher level services are not responding.
- After few hours (5-8), the kernel answers again and the load is around 40 then decreasing.We manage to get some SysRq showPc output (screenshot :
http://www.elonex.ch/shot/)
According to the basic sysreq debugging, the problem seems to be related to the functionflush_tlb_all, and it is triggered with a write or read (local or on nfs sometimes).I looked at the LKML, and didn't find any known issues. Maybe it has been corrected but not backported by redhat ! I'll appreciate any help.
Quoted 8 lines
Thank you in advance.
detailed configuration :
---------------
Processor : 2 x 2.8Ghz Pentium Xeon
Motherboard : Intel se7501cw2
Memory : 4 x 512MB DDR 266 ECC registered
Kernel : 2.4.20-31 (Redhat 7.3 with updates)
You should report this one to the RH people, but I think RH 7.3 isnt support anymore?
Upgrading the kernel is a good idea.