Skip to contentSkip to conversation

SATA loosing interrupts

DISCUSSION J.A. Magallon 2 participants 2 messages Nov 9, 2004

lore
Share & tools
lore
#0 lore raw

Hi...

Apart from this, 2.6.9-mm1 is fairly stable (Congrats!), I use it as samba server and is working fine. But sometimes I get this, and the box gets unresponsive:

Nov  6 04:05:54 nada kernel: ata5: command timeout
Nov  6 04:06:19 nada kernel: hde: dma_timer_expiry: dma status == 0x24
Nov  6 04:06:29 nada kernel: hde: DMA interrupt recovery
Nov  6 04:06:29 nada kernel: hde: lost interrupt

Any ata5 is a SATA channel on the second of two Promise cards.

Any ideas ?

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.9-jam1 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #10

#1 lore raw
Quoted 6 lines · J.A. Magallon

Hi...

Apart from this, 2.6.9-mm1 is fairly stable (Congrats!), I use it as samba server and is working fine. But sometimes I get this, and the box gets unresponsive:

Quoted 9 lines
Nov  6 04:05:54 nada kernel: ata5: command timeout
Nov  6 04:06:19 nada kernel: hde: dma_timer_expiry: dma status == 0x24
Nov  6 04:06:29 nada kernel: hde: DMA interrupt recovery
Nov  6 04:06:29 nada kernel: hde: lost interrupt

Any ata5 is a SATA channel on the second of two Promise cards.

Any ideas ?

I'm not sure what the cause of this is, but this does indeed to be a common problem. This is the second e-mail today on lkml about this and i've seen it logged against a couple of distros.

I've hit it on a test system as well, which runs 2.4.9, 2.4.21, without problems, but hits the above error on 2.6.9, and the system becomes completely unresponsive. Another note of interest is that i've seen the following message in the logs:

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing...

So indeed it seems like some sort of timing issue?

-Jason