Skip to contentSkip to conversation

mixing u32 and fwmark

LARTC Kasp 4 participants 4 messages Nov 19, 2004

lore
Share & tools
lore

Kasp

author
#0 lore raw

Hi!

There is one thing I can't do. In my country we have to pay for "foreign" internet. Local internet is cheap and fast, but foreign is slow and expensive. So I want do following:

mark every packet with iptables, where --set-mark 1 for foreign internet, but --set-mark 2 for local internet
next when I got all traffic marking, I need to assign traffic to users so I make classes, like:

tc qdisc add dev eth1 root handle 1: htb
tc class add dev eth1 parent 1: classid 1:1 htb rate 900kbps ceil 900kbps

tc class add dev eth1 parent 1:1 classid 1:10 htb rate 30kbps ceil 500kbps

tc class add dev eth1 parent 1:10 classid 1:11 htb rate 10kbps ceil 10kbps

tc class add dev eth1 parent 1:10 classid 1:12 htb rate 30kbps ceil 50kbps
....

and now I have very big problem! How do I assign certain speed for certain IP (and also looking is it local or foreign internet)

If I just set:
tc filter add dev eth1 parent 1: protocol ip prio 4 handle 0x1 fw classid 1:11

then it will affect all my users, but I need set this to each user individually (each class) just to get sure, every user gets certain speed.

Actually it seems, I need to combine fwmark with u32 classifier or something.
What do you sugest to do? I can't find a solution for my problem.

Advertisement:

Atrodiet savu celojumu seit!
http://travel.inbox.lv

#1 lore raw
Quoted 27 lines · Kasp

Hi!

There is one thing I can't do. In my country we have to pay for "foreign" internet. Local internet is cheap and fast, but foreign is slow and expensive. So I want do following:

mark every packet with iptables, where --set-mark 1 for foreign internet, but --set-mark 2 for local internet
next when I got all traffic marking, I need to assign traffic to users so I make classes, like:

tc qdisc add dev eth1 root handle 1: htb
tc class add dev eth1 parent 1: classid 1:1 htb rate 900kbps ceil 900kbps

tc class add dev eth1 parent 1:1 classid 1:10 htb rate 30kbps ceil 500kbps

tc class add dev eth1 parent 1:10 classid 1:11 htb rate 10kbps ceil 10kbps

tc class add dev eth1 parent 1:10 classid 1:12 htb rate 30kbps ceil 50kbps
....

and now I have very big problem! How do I assign certain speed for certain IP (and also looking is it local or foreign internet)

If I just set:
tc filter add dev eth1 parent 1: protocol ip prio 4 handle 0x1 fw classid 1:11

Quoted 6 lines

then it will affect all my users, but I need set this to each user individually (each class) just to get sure, every user gets certain speed.

Actually it seems, I need to combine fwmark with u32 classifier or something.
What do you sugest to do? I can't find a solution for my problem.

Please see http://kernel.umbrella.ro/
in "net" section you will find what you want.

---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Kasp

For local, foreign internet you can use :
http://www.cookinglinux.org/geoip/

BR,

Quoted 39 lines · Kasp

Hi!

There is one thing I can't do. In my country we have to pay for "foreign" internet. Local internet is cheap and fast, but foreign is slow and expensive. So I want do following:

mark every packet with iptables, where --set-mark 1 for foreign internet, but --set-mark 2 for local internet
next when I got all traffic marking, I need to assign traffic to users so I make classes, like:

tc qdisc add dev eth1 root handle 1: htb
tc class add dev eth1 parent 1: classid 1:1 htb rate 900kbps ceil 900kbps

tc class add dev eth1 parent 1:1 classid 1:10 htb rate 30kbps ceil 500kbps

tc class add dev eth1 parent 1:10 classid 1:11 htb rate 10kbps ceil 10kbps

tc class add dev eth1 parent 1:10 classid 1:12 htb rate 30kbps ceil 50kbps
....

and now I have very big problem! How do I assign certain speed for certain IP (and also looking is it local or foreign internet)

If I just set:
tc filter add dev eth1 parent 1: protocol ip prio 4 handle 0x1 fw classid 1:11

then it will affect all my users, but I need set this to each user individually (each class) just to get sure, every user gets certain speed.

Actually it seems, I need to combine fwmark with u32 classifier or something.
What do you sugest to do? I can't find a solution for my problem.

__________
Advertisement:

Atrodiet savu celojumu seit!

Signature · 5 lines
Eric Leblond <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Kasp

You can send the marked packets with 1 in a chain, and marked packets with 2 in other chain, and then re-mark them based on source/destination ips, and you will use only fw filters. What Cata said looks damn intersting (I'll check that later). You may also sniff the traffic with tcpdump and see if the tos value of internet is different than the one from your country , so you can use only u32 filters. Another tool that might help you is mipclasses from
http://metropolitana.loginet.ro/

Quoted 1 line · Kasp

Hi!

There is one thing I can't do. In my country we have to pay

Quoted 1 line

for

"foreign" internet. Local internet is cheap and fast, but foreign

Quoted 1 line

is

slow and expensive. So I want do following:

mark every packet with

Quoted 1 line

iptables, where --set-mark 1 for foreign

internet, but --set-mark 2 for

Quoted 1 line

local internet

next when I got all traffic marking, I need to assign traffic

Quoted 1 line

to users

so I make classes, like:

tc qdisc add dev eth1 root handle 1:

Quoted 1 line

htb

tc class add dev eth1 parent 1: classid 1:1 htb rate 900kbps ceil

Quoted 1 line

900kbps

tc class add dev eth1 parent 1:1 classid 1:10 htb rate 30kbps

Quoted 1 line

ceil 500kbps

tc class add dev eth1 parent 1:10 classid 1:11 htb rate

Quoted 1 line

10kbps ceil 10kbps

tc class add dev eth1 parent 1:10 classid 1:12 htb

Quoted 1 line

rate 30kbps ceil 50kbps

....

and now I have very big problem! How do I

Quoted 1 line

assign certain speed for

certain IP (and also looking is it local or foreign

Quoted 1 line

internet)

If I just set:
tc filter add dev eth1 parent 1: protocol ip prio

Quoted 1 line

4 handle 0x1 fw classid 1:11

then it will affect all my users, but I need

Quoted 1 line

set this to each user

individually (each class) just to get sure, every user

Quoted 1 line

gets certain speed.

Actually it seems, I need to combine fwmark with u32

Quoted 1 line

classifier or

something.
What do you sugest to do? I can't find a solution

Quoted 7 lines

for my problem.
__________
Advertisement:

Atrodiet savu celojumu seit!

Signature · 4 lines
Bla bla
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/