Skip to contentSkip to conversation

Booting 2.6.10-rc3

DISCUSSION Anandraj 3 participants 5 messages Dec 5, 2004 – Dec 7, 2004

lore
Share & tools
lore

Anandraj

author
#0 lore raw

hi,
My linux box with 2.6.9 kernel patched with 2.6.10-rc3 patch doesnot come up.
It shows the following while booting-

root(hd0,4)
Filesystem type is ext2fs , partition type 0x83 kernel /vmlinuz-2.6.10-rc3 ro root=LABLE=/ rhgb quiet

    [Linux-bzImage, setup=0x1400,size=0x187b53]
initrd /initrd-2.6.10-rc3.img
    [Linux-initrd @ 0x1fcb1000,0x2eb22 bytes]

Uncompressing Linux... Ok, booting kernel audit(1102189352.204:0):initialized
Red Hat nash version 3.5.22 starting
mount: error 6 mounting ext3
pivotroot: pivo_root(/sysroot,/sysroot/initrd) failed : 2 umount /initrd/proc failed: 2
Kenel panic - not syncing: No init found. Try Passing init=option to kernel.

I am using Fedora 2 distro!
The default kernel 2.6.5-1.358 that comes along with the distro works !

I had looked into various forums for "mount: error 6 mounting ext3", none of the aswers given by them worked,
the answers like , making your ext3 module inbuilt ,also does not work !

Mine is a simple desktop PC with Pentium 4 512MB RAM, it does not deal with any SCSI stuff!
Can somebody help me on this !! ??

TIA,
Anand

#1 lore raw
Quoted 7 lines · Anandraj

Red Hat nash version 3.5.22 starting mount: error 6 mounting ext3
pivotroot: pivo_root(/sysroot,/sysroot/initrd) failed : 2 umount /initrd/proc failed: 2
Kenel panic - not syncing: No init found. Try Passing init=option to kernel.

Can somebody help me on this !! ??

You need to read the build instructions for a Fedora Core distribution. Briefly however, modern distros rely upon an initial RAMdisk which sets up various hardware drivers before changing the root filesystem with the pivot_root utility and booting the main system proper.

There's probably a missing mkinitrd et al. in there.

Cheers,

Jon.

#2 lore raw
In reply to Anandraj
Quoted 8 lines · Anandraj

hi,
My linux box with 2.6.9 kernel patched with 2.6.10-rc3 patch doesnot come up.
It shows the following while booting-

root(hd0,4)
Filesystem type is ext2fs , partition type 0x83 kernel /vmlinuz-2.6.10-rc3 ro root=LABLE=/ rhgb quiet

try root=LABEL=/.

If that does not work, try passing the root fs as something like:

root=/dev/hda3

or wherever your root filesystem is.

Quoted 16 lines
    [Linux-bzImage, setup=0x1400,size=0x187b53]
initrd /initrd-2.6.10-rc3.img
    [Linux-initrd @ 0x1fcb1000,0x2eb22 bytes]

Uncompressing Linux... Ok, booting kernel audit(1102189352.204:0):initialized
Red Hat nash version 3.5.22 starting mount: error 6 mounting ext3
pivotroot: pivo_root(/sysroot,/sysroot/initrd) failed : 2 umount /initrd/proc failed: 2
Kenel panic - not syncing: No init found. Try Passing init=option to kernel.

I am using Fedora 2 distro!
The default kernel 2.6.5-1.358 that comes along with the distro works !

Quoted 8 lines

I had looked into various forums for "mount: error 6 mounting ext3", none of the aswers given by them worked,
the answers like , making your ext3 module inbuilt ,also does not work !

Mine is a simple desktop PC with Pentium 4 512MB RAM, it does not deal with any SCSI stuff!
Can somebody help me on this !! ??

If you did not build an initrd, you do not need reference to an initrd in the grub.conf file.

Quoted 9 lines

TIA,
Anand

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#3 lore raw

hi ,

Now it works after makingsome changes in the grub.conf

all i did was, in the grub.conf changed the

kernel /vmlinuz-2.6.10-rc3 ro root=LABLE=/ rhgb quiet

to

kernel /vmlinuz-2.6.10-rc3

but, i have no idea , this works!
can anybody shed some light on this ?

TIA,
Anand

Quoted 58 lines · Jim Nelson
Quoted 8 lines · Anandraj

hi,
My linux box with 2.6.9 kernel patched with 2.6.10-rc3 patch doesnot come up.
It shows the following while booting-

root(hd0,4)
Filesystem type is ext2fs , partition type 0x83 kernel /vmlinuz-2.6.10-rc3 ro root=LABLE=/ rhgb quiet

try root=LABEL=/.

If that does not work, try passing the root fs as something like:

root=/dev/hda3

or wherever your root filesystem is.

Quoted 17 lines
    [Linux-bzImage, setup=0x1400,size=0x187b53]
initrd /initrd-2.6.10-rc3.img
    [Linux-initrd @ 0x1fcb1000,0x2eb22 bytes]

Uncompressing Linux... Ok, booting kernel audit(1102189352.204:0):initialized
Red Hat nash version 3.5.22 starting
mount: error 6 mounting ext3
pivotroot: pivo_root(/sysroot,/sysroot/initrd) failed : 2 umount /initrd/proc failed: 2
Kenel panic - not syncing: No init found. Try Passing init=option to kernel.

I am using Fedora 2 distro!
The default kernel 2.6.5-1.358 that comes along with the distro works !

Quoted 8 lines

I had looked into various forums for "mount: error 6 mounting ext3", none of the aswers given by them worked,
the answers like , making your ext3 module inbuilt ,also does not work !

Mine is a simple desktop PC with Pentium 4 512MB RAM, it does not deal with any SCSI stuff!
Can somebody help me on this !! ??

If you did not build an initrd, you do not need reference to an initrd in the
grub.conf file.

Quoted 9 lines

TIA,
Anand

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw
Quoted 4 lines · Anandraj

Now it works after makingsome changes in the grub.conf

all i did was, in the grub.conf changed the

Quoted 8 lines

kernel /vmlinuz-2.6.10-rc3 ro root=LABLE=/ rhgb quiet

to

kernel /vmlinuz-2.6.10-rc3

but, i have no idea , this works!
can anybody shed some light on this ?

There's a repeated typo in your root=LABLE=/ entry, since it should be LABEL instead of LABLE.

That entry tells the kernel to look for a filesystem which contains a label in its superblock that matches the one you gave via grub.

Cheers,

Jon.