Skip to contentSkip to conversation

sata_sil problems

DISCUSSION Haroldo Gamal 1 participant 1 message Dec 8, 2004

lore
Share & tools
lore
#0 lore raw

Jeff,

I have a machine equipped with 3 sata interfaces, Intel, promise and silicon Image.

[root@backup01 hgamal]# lsmod

Module                  Size  Used by
md5                     4161  1
ipv6                  237569  12
e1000                  77901  0
floppy                 58609  0
sg                     32609  0
microcode               6497  0
dm_mod                 55253  0
uhci_hcd               31577  0
ehci_hcd               31685  0
button                  6609  0
battery                 8645  0
ac                      4933  0
ext3                  121033  8
jbd                    75481  1 ext3
sata_promise            9797  3
ata_piix                8645  2
sata_sil                8005  1
libata                 41541  3 sata_promise,ata_piix,sata_sil
sd_mod                 16449  12
scsi_mod              119697  4 sg,sata_promise,libata,sd_mod

The machine has 6 Seagate ST3200822AS disks (3 on promise, 2 on Intel and 1 in sata_sil).

[root@backup01 hgamal]# cat /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi7 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05

I am having the following problems with sata_sil:

Dec  8 16:04:47 backup01 kernel: ata1: command 0x35 timeout, stat 0xd8
host_stat 0x61
Dec  8 16:04:47 backup01 kernel: ata1: status=0xd8 { Busy }
Dec  8 16:04:47 backup01 kernel: SCSI error : <0 0 0 0> return code =
0x8000002
Dec  8 16:04:47 backup01 kernel: EOM Current sda: sense = 70 4b
Dec  8 16:04:47 backup01 kernel: ASC=87 ASCQ=42
Dec  8 16:04:47 backup01 kernel: end_request: I/O error, dev sda, sector
277822631
Dec  8 16:04:47 backup01 kernel: Buffer I/O error on device sda1,
logical block 34727821
Dec  8 16:04:47 backup01 kernel: lost page write due to I/O error on
sda1
Dec  8 16:04:47 backup01 kernel: ATA: abnormal status 0xD8 on port

0x42862087

The kernel version is 2.6.9 (Fedora Core 2 - 2.6.9-1.6_FC2).

Any suggestion?

Thanks in advance,

Signature · 4 lines
Haroldo Gamal
Departamento Técnico
[email protected]
http://www.infolink.com.br