Skip to contentSkip to conversation

replace bad hard disc

linux-lvm Stefan Onken 4 participants 8 messages Oct 15, 2001 – Oct 19, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I already looked in the How-to and FAQ, but I do not find any step by step tutorial to change a bad hard disc in a LVM System.

I have two hard discs, 100 Gig + 60 Gig with reiserfs. The 60gig hard drive has some bad blocks, so I would like to replace it with a new hard disc. May anyone please be so kind and give me a helping hand for this problem....

linux:~ # lvscan
lvscan -- ACTIVE "/dev/Stonki2/LV_Stonki2" [150.59 GB]
lvscan -- 1 logical volumes with 150.59 GB total in 1 volume group lvscan -- 1 active logical volumes

linux:~ # lvdisplay /dev/Stonki2/LV_Stonki2
--- Logical volume ---

LV Name                /dev/Stonki2/LV_Stonki2
VG Name                Stonki2
LV Write Access        read/write
LV Status              available
LV #                   1
# open                 1
LV Size                150.59 GB
Current LE             38550
Allocated LE           38550
Allocation             next free
Read ahead sectors     120
Block device           58:0

thanks anyway...

cu

stonki

Signature · 1 line
The More I See, The More I Know. The More I Know, The Less I Understand
#1 lore raw

Stefan,

add a new hard drive to your system and create (at least) an LVM partition (Type 0x8E) on it. Let's call the new one /dev/sde1 and your flaky one /dev/sdd1 just for the purpose of this example.

Then:

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

After this went ok you can uninstall the flaky drive from your system and start to disassemble it in order to create some nice wallclocks ;-)

In case pvmove complains about read errors and stops before moving all data over, please come back to me for further help.

Regards,
Heinz -- The LVM Guy --

Quoted 33 lines · Stefan Onken

Hello,

I already looked in the How-to and FAQ, but I do not find any step by step tutorial to change a bad hard disc in a LVM System.

I have two hard discs, 100 Gig + 60 Gig with reiserfs. The 60gig hard drive has some bad blocks, so I would like to replace it with a new hard disc. May anyone please be so kind and give me a helping hand for this problem....

linux:~ # lvscan
lvscan -- ACTIVE "/dev/Stonki2/LV_Stonki2" [150.59 GB]
lvscan -- 1 logical volumes with 150.59 GB total in 1 volume group lvscan -- 1 active logical volumes

linux:~ # lvdisplay /dev/Stonki2/LV_Stonki2
--- Logical volume ---

LV Name                /dev/Stonki2/LV_Stonki2
VG Name                Stonki2
LV Write Access        read/write
LV Status              available
LV #                   1
# open                 1
LV Size                150.59 GB
Current LE             38550
Allocated LE           38550
Allocation             next free
Read ahead sectors     120
Block device           58:0
Quoted 16 lines

thanks anyway...

cu

stonki

Signature · 8 lines
The More I See, The More I Know. The More I Know, The Less I Understand


_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf Germany
[email protected] +49 2626 141200

                                                       FAX 924446

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

#2 lore raw
Quoted 7 lines · Heinz J . Mauelshagen

Stefan,

add a new hard drive to your system and create (at least) an LVM partition (Type 0x8E) on it. Let's call the new one /dev/sde1 and your flaky one /dev/sdd1 just for the purpose of this example.

Quoted 7 lines

Then:

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

Hello,
will pvmove work if /dev/sde1 is already added to Stonki2 if there is enough space available on /dev/sde1 ?

Reason: I have a vg containing 5 HDs that includes a small 4GB one. I would like to remove this one without adding another HD. Enough space is available.

Regards
Uli

Signature · 1 line
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5
#3 lore raw
Quoted 16 lines · Ulrich Wiederhold
Quoted 7 lines · Heinz J . Mauelshagen

Stefan,

add a new hard drive to your system and create (at least) an LVM partition (Type 0x8E) on it. Let's call the new one /dev/sde1 and your flaky one /dev/sdd1 just for the purpose of this example.

Quoted 7 lines

Then:

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

Quoted 7 lines

Hello,
will pvmove work if /dev/sde1 is already added to Stonki2 if there is enough space available on /dev/sde1 ?

Reason: I have a vg containing 5 HDs that includes a small 4GB one. I would like to remove this one without adding another HD. Enough space is available.

Uli,

yes pvmove will work. Say your 4G PV is accessed via /dev/sdc1 then you just run "pvmove /dev/sdc1" and it'll search for free space on the other PVs to relocate data to. If your LV(s) with data allocated on /dev/sdc1 are striped, you need to have enough space for the particular stripes on /dev/sdc1 on another PV in the VG, which doesn't have other stripes of the very same LV(s) allocated.

Quoted 12 lines

Regards
Uli

Signature · 7 lines
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5

_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
Signature · 15 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
[email protected]                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#4 lore raw
In reply to Heinz J . Mauelshagen

Hallo Heinz J . Mauelshagen,

Am Dienstag, 16. Oktober 2001 um 10:55 schriebst Du:

Quoted 4 lines

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

stupid question: what about resizing the reiserfs file system ? Is it not necessary ?

cu
stonki

Signature · 1 line
The More I See, The More I Know. The More I Know, The Less I Understand
#5 lore raw
Quoted 8 lines · Stefan Onken
Quoted 5 lines

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

stupid question: what about resizing the reiserfs file system ? Is it not necessary ?

Not for moving things around. These steps do not resize any logical volume, they just move the data from one pv to another. So you don't need to resize the file system here either.

Regards, Markus

Signature · 2 lines
Spiegel-Leser wissen mehr. Fuer ein Semester-Abo!
http://www.kawo2.rwth-aachen.de/~mdobel/semesterabo.html
#6 lore raw
Quoted 9 lines · Markus Dobel
Quoted 8 lines · Stefan Onken
Quoted 5 lines

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

stupid question: what about resizing the reiserfs file system ? Is it not necessary ?

Oh, but this means in my example I will have to lower the filesystem (xfs), because I will remove a hd and added all my scace to the vg and lv´s, right?
Is it possible to lower an xfs.filesystem to remove a HD or is it possible to remove a HD without resizing (no mount now), add a new bigger HD, grow the filesystem, mount it?

Uli

Signature · 1 line
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5
#7 lore raw

Ulrich,

you can't shrink an XFS.

A hHD contained in a VG can only be removed when it has no LVs on it.

Quoted 27 lines · Ulrich Wiederhold
Quoted 9 lines · Markus Dobel
Quoted 8 lines · Stefan Onken
Quoted 5 lines

pvcreate /dev/sde1
vgextend Stonki2 /dev/sde1
pvmove /dev/sdd1 /dev/sde1
vgreduce Stonki2 /dev/sdd1

stupid question: what about resizing the reiserfs file system ? Is it not necessary ?

Oh, but this means in my example I will have to lower the filesystem (xfs), because I will remove a hd and added all my scace to the vg and lv´s, right?
Is it possible to lower an xfs.filesystem to remove a HD or is it possible to remove a HD without resizing (no mount now), add a new bigger HD, grow the filesystem, mount it?

Uli

Signature · 7 lines
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5

_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
Signature · 15 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
[email protected]                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-