Skip to contentSkip to conversation

USB storage (pendrive) problems

DISCUSSION Attila BODY 4 participants 7 messages Dec 20, 2004 – Dec 24, 2004 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

I have some weird problems with my pendrives recently. I just compile a 2.6.9 to check if the problem is still exists there.

current kernel is 2.6.10-rc3 and the situation is the following:

If I copy more than few megabytes to the drive, the activity LED keeps flashing forever. sync, umount keeps runing forever, normal reboot is inpossible (alt+sysreq+b seems to work)

Tested with usb 1.1 and 2.0 pendrives, behaviour is the same.

Any ideas?

P.S: Please cc directly to me, I am not subscribed, thanks.

compi

#1 lore raw
Quoted 5 lines · Attila BODY

Hi,

I have some weird problems with my pendrives recently. I just compile a 2.6.9 to check if the problem is still exists there.

Quoted 8 lines

current kernel is 2.6.10-rc3 and the situation is the following:

If I copy more than few megabytes to the drive, the activity LED keeps flashing forever. sync, umount keeps runing forever, normal reboot is inpossible (alt+sysreq+b seems to work)

Tested with usb 1.1 and 2.0 pendrives, behaviour is the same.

I'm doing exactly that with 2.6.10-rc3. umount does take a very long time (but I had just written 600Mb+ over usb 1.1)

Are you sure it doesn't come back if you leave it long enough?

Do the throughput sums; you'll be suprised how long it takes to send more than a few Mb over usb 1.1 (1.5Mb/s). Eg 600Mb = 7minutes

Usb 2 should be much faster; Do you have EHCI loaded?

Andrew Walrond

#2 lore raw
Quoted 17 lines · Andrew Walrond
Quoted 5 lines · Attila BODY

Hi,

I have some weird problems with my pendrives recently. I just compile a 2.6.9 to check if the problem is still exists there.

Quoted 8 lines

current kernel is 2.6.10-rc3 and the situation is the following:

If I copy more than few megabytes to the drive, the activity LED keeps flashing forever. sync, umount keeps runing forever, normal reboot is inpossible (alt+sysreq+b seems to work)

Tested with usb 1.1 and 2.0 pendrives, behaviour is the same.

Quoted 7 lines

I'm doing exactly that with 2.6.10-rc3. umount does take a very long time (but I had just written 600Mb+ over usb 1.1)

Are you sure it doesn't come back if you leave it long enough?

Do the throughput sums; you'll be suprised how long it takes to send more than a few Mb over usb 1.1 (1.5Mb/s). Eg 600Mb = 7minutes

Usb 2 should be much faster; Do you have EHCI loaded?

and which usb driver are you using?
ub or usb-storage? (what's the /dev name that you mount?)

Signature · 1 line
~Randy
#3 lore raw
Quoted 3 lines · Randy.Dunlap

and which usb driver are you using?
ub or usb-storage? (what's the /dev name that you mount?)

My pen gets mounted as /dev/sdc1 on the usb1 x86_64 box which I mostly use , and /dev/uba1 on a usb2 P4 box. The pen seems to work fine on both.

Andrew

#4 lore raw
In reply to Randy.Dunlap
Quoted 23 lines · Randy.Dunlap
Quoted 22 lines · Andrew Walrond
Quoted 5 lines · Attila BODY

Hi,

I have some weird problems with my pendrives recently. I just compile a 2.6.9 to check if the problem is still exists there.

Quoted 8 lines

current kernel is 2.6.10-rc3 and the situation is the following:

If I copy more than few megabytes to the drive, the activity LED keeps flashing forever. sync, umount keeps runing forever, normal reboot is inpossible (alt+sysreq+b seems to work)

Tested with usb 1.1 and 2.0 pendrives, behaviour is the same.

I'm doing exactly that with 2.6.10-rc3. umount does take a very long time (but I had just written 600Mb+ over usb 1.1)

Are you sure it doesn't come back if you leave it long enough?

Quoted 7 lines
Quoted 4 lines

Do the throughput sums; you'll be suprised how long it takes to send more than a few Mb over usb 1.1 (1.5Mb/s). Eg 600Mb = 7minutes

Usb 2 should be much faster; Do you have EHCI loaded?

and which usb driver are you using?
ub or usb-storage? (what's the /dev name that you mount?)

Hi,

Here is the log snipet when plug the pendrive in, i thin It should be clear from this that is uses ehci_hcd, ub, hotplug and udev. For 1.1 it uses uhci_hcd

Dec 21 08:58:51 smiley kernel: ehci_hcd 0000:00:10.3: port 6 high speed
Dec 21 08:58:51 smiley kernel: ehci_hcd 0000:00:10.3: GetStatus port 6
status 001005 POWER sig=se0  PE CONNECT
Dec 21 08:58:51 smiley kernel: usb 1-6: new device strings: Mfr=2,
Product=3, SerialNumber=4
Dec 21 08:58:51 smiley kernel: usb 1-6: default language 0x0409
Dec 21 08:58:51 smiley kernel: usb 1-6: Product: Cruzer Mini
Dec 21 08:58:51 smiley kernel: usb 1-6: Manufacturer: SanDisk
Corporation
Dec 21 08:58:51 smiley kernel: usb 1-6: SerialNumber: 00567026
Dec 21 08:58:51 smiley kernel: usb 1-6: hotplug
Dec 21 08:58:51 smiley kernel: usb 1-6: adding 1-6:1.0 (config #1,
interface 0)
Dec 21 08:58:51 smiley kernel: usb 1-6:1.0: hotplug
Dec 21 08:58:51 smiley kernel: ub 1-6:1.0: usb_probe_interface
Dec 21 08:58:51 smiley kernel: ub 1-6:1.0: usb_probe_interface - got id
Dec 21 08:58:51 smiley usb.agent[6288]:      ub: already loaded
Dec 21 08:58:52 smiley kernel: uba: device 3 capacity nsec 512000 bsize
512
Dec 21 08:58:52 smiley kernel: uba: device 3 capacity nsec 512000 bsize
512
Dec 21 08:58:52 smiley kernel: /dev/ub/a: p1
Dec 21 08:58:52 smiley udev[6328]: creating device node '/dev/uba1'
Dec 21 08:58:52 smiley udev[6321]: creating device node '/dev/uba'

The problem is reproducable with 2.6.9. Unfortunately I have no time right now to check 2.6.8.1 if the problem already presists there. It seems however that the 1.1 device recovers if I wait long enough, but I left the 2.0 device here all night and it did not. To make it worse, it seems that the whole USB 2.0 system went down, there was no activity even if i reconnected the pen, had to reboot to be detected and powered on again (normal reboot was not an option again, so I had to use alt-sysrq-B).

Hope this helps to track down this problem.

compi

P.S.: Please cc, I'm not subscribed.

#6 lore raw
In reply to a message not in the archive
Quoted 8 lines · Attila BODY
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

If I copy more than few megabytes to the drive, the activity LED keeps flashing forever. sync, umount keeps runing forever, normal reboot is inpossible (alt+sysreq+b seems to work)

Tested with usb 1.1 and 2.0 pendrives, behaviour is the same.

Dec 21 08:58:52 smiley kernel: /dev/ub/a: p1
Quoted 7 lines

The problem is reproducable with 2.6.9. [...]

I left the 2.0 device here all night and it did not. To make it worse, it seems that the whole USB 2.0 system went down, there was no activity even if i reconnected the pen, had to reboot to be detected and powered on again (normal reboot was not an option again, so I had to use alt-sysrq-B).

Thanks for the note. Unfortunately, 2.6.9 apparently has problems with its virtual memory and write throttling, so I'm sure a few people suffering from it will jump on this thread. It's essential to split root causes. Your case may be different from the original poster's, who apparently had the same deal with both ub and usb-storage. First things first, did you try to set CONFIG_BLK_DEV_UB to off? What happens if you do?

-- Pete

#7 lore raw

Hi,

Quoted 6 lines · Pete Zaitcev

Thanks for the note. Unfortunately, 2.6.9 apparently has problems with its virtual memory and write throttling, so I'm sure a few people suffering from it will jump on this thread. It's essential to split root causes. Your case may be different from the original poster's, who apparently had the same deal with both ub and usb-storage. First things first, did you try to set CONFIG_BLK_DEV_UB to off? What happens if you do?

It works then, so the problem seems to be with the ub driver, but it is still a question why the 1.1 device seems to wprk better with it.

brgds,

compi