USB storage: Make Pentax *ist DS works

PATCH In review Miquel Vidal 2 participants 3 messages Dec 30, 2004 – Jan 7, 2005

lore

Share & tools

lore

Miquel Vidal

author

2004-12-30 01:47 UTC #0 lore raw

PATCH 1/1 USB storage: Make Pentax *ist DS works

Hi All,

The change below in unusual_devs entries is needed to get the new Pentax SLR *ist DS camera working.

BR.
miquel

--- linux-2.6.10/drivers/usb/storage/unusual_devs.h.orig

2004-12-30 02:26:25.000000000 +0100

+++ linux-2.6.10/drivers/usb/storage/unusual_devs.h 2004-12-30
02:26:18.000000000 +0100
@@ -775,7 +775,16 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xff
"Optio S/S4",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ),
-
+
+
+/* Submitted by Miquel Vidal <[email protected]> */ +UNUSUAL_DEV( 0x0a17, 0x0021, 0x0100, 0x0200,

+                "Pentax",
+                "*ist DS",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_INQUIRY ),

+
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,

                "ATI",

Phil Dibowitz

2005-01-02 06:47 UTC #1 lore raw

Quoted 4 lines · Miquel Vidal

Hi All,
The change below in unusual_devs entries is needed to get the new Pentax SLR *ist DS camera working.

Can you please include the output of "cat /proc/bus/usb/devices" ? Thanks.

Signature · 7 lines

Phil Dibowitz                             [email protected]
Freeware and Technical Pages              Insanity Palace of Metallica
http://www.phildev.net/                   http://www.ipom.com/

"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
 - Benjamin Franklin, 1759

Miquel Vidal

author

2005-01-07 23:43 UTC #2 lore raw

Quoted 8 lines · Phil Dibowitz

Quoted 4 lines · Miquel Vidal
Hi All,
The change below in unusual_devs entries is needed to get the new Pentax SLR *ist DS camera working.
Can you please include the output of "cat /proc/bus/usb/devices" ? Thanks.

miquel@kusanagi:~$ cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.10 uhci_hcd
S:  Product=Intel Corp. 82801BA/BAM USB (Hub #1)
S:  SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0a17 ProdID=0021 Rev= 1.00
S:  Manufacturer=PENTAX Corporation
S:  Product=PENTAX *ist DS
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

miquel

Miquel Vidal          ::  Using Debian GNU/Linux
BarraPunto SysAdmin   ::  [email protected]
http://barrapunto.com ::  http://barrapunto.com/~yonderboy/bitacora

GnuPG public key available at http://sinetgy.org/~miquel