Suspend/resume to disk problem
Hi all,
I'm using Debian GNU/linux 3.1 with kernel 2.6.10 on my IBM Thinkpad R40, and I'm experiencing a strange problem with suspend to disk.
If I configure the kernel options
#
# Power management options (ACPI, APM)
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hda5",
issuing
echo platform > /sys/kernel/disk
echo disk > /sys/kernel/state
always results in error:
swsusp: FATAL: cannot find swap device, try swapon -a!
My swap partition was on, as can be confirmed by
(output from free)
total used free shared buffers cached
Mem: 515836 469716 46120 0 35588 220672
-/+ buffers/cache: 213456 302380
Swap: 763520 0 763520
(cat /proc/swaps)
Filename Type Size Used
Priority/dev/hda5 partition 763520 0
-1
So, after searching with no luck for help in google, I looked at in the source code for kernel/power/swsusp.c
The problem seems to be in function "is_resume_device"
static int is_resume_device(const struct swap_info_struct *swap_info)
...
return S_ISBLK(inode->i_mode) &&
resume_device == MKDEV(imajor(inode), iminor(inode));
}The resume_device variable is not initialised at this stage and has the value zero, which is different from MKDEV(...)
Can you please check this out?
I was able to suspend to disk by setting CONFIG_PM_STD_PARTITION="", but I cannot resume.
Again, resume_device is set to 0 in function swsusp_read after
resume_device = name_to_dev_t(resume_file);
and therefore, it is not possible to open the swap device and
resume_bdev = open_by_devnum(resume_device, FMODE_READ);returns an error, aborting the resume process.
I check that resume_file is correctly set to "/dev/hda5" by the resume_setup function form disk.c
Thanks for you attention,
Cheers,
Francisco
Quoted 5 lines · Francisco Martins
Hi all,
I'm using Debian GNU/linux 3.1 with kernel 2.6.10 on my IBM Thinkpad R40, and I'm experiencing a strange problem with suspend to disk.
Quoted 8 lines
If I configure the kernel options
#
# Power management options (ACPI, APM)
#CONFIG_PM=y
#CONFIG_PM_DEBUGis not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hda5",
AFAIK the typical way people do it (or at least what I'm doing, which isn't hitting this bug) is to set CONFIG_PM_STD_PARTITION to "" then to add (in your case) "resume=/dev/hda5" to the kernel boot command line.
This won't really fix your bug, but it should let you use swsusp in the meantime.
-Barry K. Nathan <[email protected]>
Hi!
Quoted 12 lines
Quoted 11 lines
I'm using Debian GNU/linux 3.1 with kernel 2.6.10 on my IBM Thinkpad R40, and I'm experiencing a strange problem with suspend to disk.
If I configure the kernel options
#
# Power management options (ACPI, APM)
#CONFIG_PM=y
#CONFIG_PM_DEBUGis not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/hda5",
Quoted 6 lines
AFAIK the typical way people do it (or at least what I'm doing, which isn't hitting this bug) is to set
CONFIG_PM_STD_PARTITIONto "" then to add (in your case) "resume=/dev/hda5" to the kernel boot command line.This won't really fix your bug, but it should let you use swsusp in the meantime.
Perhaps its time for CONFIG_PM_STD_PARTITION to go away?
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!