Skip to contentSkip to conversation

2.6.10 kernel panic: IDE/SCSI related?

DISCUSSION jago25_98 2 participants 2 messages Jan 5, 2005 – Jan 6, 2005

lore
Share & tools
lore

jago25_98

author
#0 lore raw

I'm getting regular kernel panics with a vanilla 2.6.10 kernel.

Not sure how to tell which bit is causing the panic from the output (which isn't logged).

Some of the output noted down by pen+paper:

Process Swapper (pid:0 threading info=c04b8000 task=c042db00)

Stack: ....
Call trace:
[] runtimer.softirq+0x11f/0x170
unknown boot option +0x0/0x...

code: f3....
kernel panic - not syncing: fatal exception in interupt

It crashes about every 2 days, usually when writing to disk but I'm guessing here.

I have a system with 3 SCSI cards:
Adaptec AHA-2940/2940W
Adaptec AIC-7892A U160/m
American Megatrends Inc. MegaRAID 428 Ultra RAID Controller

An the IDE bus is:
[SiS] 5513

Best I could for output is a photo:
http://www.ajpearce.co.uk/files/kernelpanic2.JPG

and maybe it could be related to this mix of hardware?

How do I begin to try and diagnose this problem? Really want to help to fix this if I can.

#1 lore raw
Quoted 4 lines · On Mer, 2005-01-05 at 21:28, jago25_98 wrote:

I'm getting regular kernel panics with a vanilla 2.6.10 kernel.

Not sure how to tell which bit is causing the panic from the output (which isn't logged).

Make sure you've applied the fixes for the nasties in 2.6.10 as shipped
- notably if you said Y or M to ACPI video support you must apply the patches posted later.