Skip to contentSkip to conversation

Connection tracking flush

LARTC Mpourtounis Dimitris 2 participants 2 messages Jan 12, 2005 – Jan 26, 2005

lore
Share & tools
lore
#0 lore raw

Hi all,

Is there a way i can flush the connection tracking on my box (after a restart in iptables)?
If the connection tracking module is unloaded and reloaded, my job will be accomplished i think. The bad thing is i want this tracking module to exist in kernel code and not loaded as a module.

Regards,
DB

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · Mpourtounis Dimitris

Is there a way i can flush the connection tracking on my box (after a restart in iptables)?
If the connection tracking module is unloaded and reloaded, my job will be accomplished i think.

Only way I know of, other than reboot.

Quoted 2 lines

The bad thing is i want this tracking
module to exist in kernel code and not loaded as a module.

Why? What's the advantage in that? Maybe if it's a tiny embedded device, but in that case the reboot options sounds viable.

Signature · 5 lines
    mail to this address is discarded unless "/dev/rob0"
    or "not-spam" is in Subject: header
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/