IEEE-1394 and disks
I have a few questions: How stable is firewire (running at 800Mbps or faster, if any is available yet)? How stable is the Linux subsystem, especially for firewire disks? Is there any particularly 800Mbps bridge chips that should be avoided or used?
How stable is the subsystem when the chain is nearly full (62 devices is full right?)
How many controllers may be in the system before the Firewire subsystem gets confused?
Trever Adams
--
"There are two ways to live your life. One is as though nothing is a miracle. The other is as though everything is a miracle." -- Albert Einstein
By bridge chips I mean IEEE-1394 to IDE. Also, is it possible to set spin down time for these IDE disks through 1394? i.e. if they are inactive for 1 hour, I would like them to spin down. Is this possible?
Trever
Quoted 17 lines · Trever L. Adams
I have a few questions: How stable is firewire (running at 800Mbps or faster, if any is available yet)? How stable is the Linux subsystem, especially for firewire disks? Is there any particularly 800Mbps bridge chips that should be avoided or used?
How stable is the subsystem when the chain is nearly full (62 devices is full right?)
How many controllers may be in the system before the Firewire subsystem gets confused?
Trever Adams
--
"There are two ways to live your life. One is as though nothing is a miracle. The other is as though everything is a miracle." -- Albert Einstein
Quoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
"If there was strife and contention in the home, very little else in life could compensate for it." -- Lawana Blackwell, The Courtship of the Vicar's Daughter, 1998
Quoted 3 lines · Trever L. Adams
By bridge chips I mean IEEE-1394 to IDE. Also, is it possible to set spin down time for these IDE disks through 1394? i.e. if they are inactive for 1 hour, I would like them to spin down. Is this possible?
Not currently. I'm not sure if this is a hardware limitation or just something that isn't implemented yet.
Jody
Quoted 2 lines
Trever
Quoted 4 lines · Trever L. Adams
I have a few questions: How stable is firewire (running at 800Mbps or faster, if any is available yet)? How stable is the Linux subsystem, especially for firewire disks? Is there any particularly 800Mbps bridge chips that should be avoided or used?
The sbp2 subsystem has stability problems, but I'm not exactly sure what they are. The core also has a few issues, but I don't think they'll affect you. This assumes you're running the latest from linux1394.org svn as there are quite a few unmerged changes (which will hopefully make it in to 2.6.12).
Quoted 2 lines
How stable is the subsystem when the chain is nearly full (62 devices is full right?)
Having lots of devices shouldn't make any difference, one way or the other. 62 devices is full. For performance reasons, a tree topology is preferred to daisy chaining all the devices.
Quoted 2 lines
How many controllers may be in the system before the Firewire subsystem gets confused?
Again, it shouldn't matter. I'm not sure if the SCSI subsystem imposes a limit on the number of drives.
I suggest asking future 1394 questions on one of the linux1394 lists:
http://sourceforge.net/mail/?group_id=2252 - someone may even have tried what you're attempting.
Jody
Quoted 12 lines
Trever Adams
--
"There are two ways to live your life. One is as though nothing is a miracle. The other is as though everything is a miracle." -- Albert Einstein-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/