Skip to contentSkip to conversation

NFS readonly failover and linux?

DISCUSSION Dan Stromberg 3 participants 12 messages Jan 28, 2005 – Feb 21, 2005

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora Core 3 both say that autofs supports replicated, readonly fileserver failover
- but then there's a footnote of sorts that says autofs only supports it to the extent that mount does.

Upon trying to do such a mount, I get:

seki-root> mount dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs
mount: warning: multiple hostnames not supported
Thu Jan 27 16:12:18

seki-root>

Is there a version of mount available, or in early development, that supports this feature?

Thanks!

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#1 lore raw
Quoted 5 lines · Dan Stromberg

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora Core 3 both say that autofs supports replicated, readonly fileserver failover
- but then there's a footnote of sorts that says autofs only supports it to the extent that mount does.

That part of the man page is old and slightly out of date.

The reason that this is left there is that autofs cannot support dynamic failover as it just uses mount. However, a different host may be selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not explicitly dealt with yet.

Quoted 7 lines

Upon trying to do such a mount, I get:

seki-root> mount dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs
mount: warning: multiple hostnames not supported
Thu Jan 27 16:12:18

What version of autofs are you using?
The autofs replicated server code is still relatively new.

If your autofs supports replicated server map entries then multiple host mount requests will not reach the mount command.

If you are using a RedHat based distro then check
http://people.redhat.com/jmoyer
for the latest patched versions

Also, you may need a kernel patch depending on your kernel version. See README.patches in the distribution or join the autofs list at
http://linux.kernel.org/mailman/listinfo/autofs

Quoted 6 lines

seki-root>

Is there a version of mount available, or in early development, that supports this feature?

Don't know. Anyone?

Ian

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#2 lore raw
Quoted 8 lines · On Sat, 2005-01-29 at 11:46 +0800, [email protected] wrote:
Quoted 5 lines · Dan Stromberg

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora Core 3 both say that autofs supports replicated, readonly fileserver failover
- but then there's a footnote of sorts that says autofs only supports it to the extent that mount does.

Quoted 7 lines

That part of the man page is old and slightly out of date.

The reason that this is left there is that autofs cannot support dynamic failover as it just uses mount. However, a different host may be selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not explicitly dealt with yet.

I see.

Quoted 10 lines
Quoted 7 lines

Upon trying to do such a mount, I get:

seki-root> mount dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs
mount: warning: multiple hostnames not supported
Thu Jan 27 16:12:18

What version of autofs are you using?
The autofs replicated server code is still relatively new.

FC3: autofs-4.1.3-28
RHEL3: autofs-4.1.3-47

The FC3 is yum update'd fairly regulary, and the RHEL3 is up2date'd regularly as well.

Quoted 2 lines

If your autofs supports replicated server map entries then multiple host mount requests will not reach the mount command.

Interesting.

Quoted 7 lines

If you are using a RedHat based distro then check
http://people.redhat.com/jmoyer
for the latest patched versions

Also, you may need a kernel patch depending on your kernel version. See README.patches in the distribution or join the autofs list at
http://linux.kernel.org/mailman/listinfo/autofs

I'm certain my management will only go for this, in the short term, if it works on a mainstream RHEL3 system. Unfortunately, for me, the rest is academic interest.

Quoted 10 lines
Quoted 6 lines

seki-root>

Is there a version of mount available, or in early development, that supports this feature?

Don't know. Anyone?

Ian

Thanks for the info!

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

maintainer
#3 lore raw
Quoted 11 lines · Dan Stromberg
Quoted 10 lines · On Sat, 2005-01-29 at 11:46 +0800, [email protected] wrote:
Quoted 5 lines · Dan Stromberg

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora Core 3 both say that autofs supports replicated, readonly fileserver failover
- but then there's a footnote of sorts that says autofs only supports it to the extent that mount does.

That part of the man page is old and slightly out of date.

Quoted 18 lines
Quoted 5 lines

The reason that this is left there is that autofs cannot support dynamic failover as it just uses mount. However, a different host may be selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not explicitly dealt with yet.

I see.

Quoted 10 lines
Quoted 7 lines

Upon trying to do such a mount, I get:

seki-root> mount dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs
mount: warning: multiple hostnames not supported
Thu Jan 27 16:12:18

What version of autofs are you using?
The autofs replicated server code is still relatively new.

But, as we know, mount doesn't know about multiple host names. autofs breaks these out.

Quoted 3 lines

FC3: autofs-4.1.3-28
RHEL3: autofs-4.1.3-47

I believe that the replicated server code should be present in both of these.

Can you confirm please Jeff?

Perhaps you are seeing a bug which needs to be addressed.

Quoted 13 lines

The FC3 is yum update'd fairly regulary, and the RHEL3 is up2date'd regularly as well.

Quoted 2 lines

If your autofs supports replicated server map entries then multiple host mount requests will not reach the mount command.

Interesting.

Quoted 4 lines

If you are using a RedHat based distro then check
http://people.redhat.com/jmoyer
for the latest patched versions

Quoted 7 lines
Quoted 3 lines

Also, you may need a kernel patch depending on your kernel version. See README.patches in the distribution or join the autofs list at
http://linux.kernel.org/mailman/listinfo/autofs

I'm certain my management will only go for this, in the short term, if it works on a mainstream RHEL3 system. Unfortunately, for me, the rest is academic interest.

Once again I believe that the kernels mentioned here are up to date wrt autofs.

Certainly, the latest FC3 kernel is at 2.6.10 which has all the autofs4 updates included in the base kernel.

I believe the latest update to RHEL3 is also up to date. Jeff?

So perhaps you could send a log trace with the "--debug" option added to the master map entry.

Ian

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#4 lore raw

==> Regarding Re: [NFS] NFS readonly failover and linux?; Ian Kent <[email protected]> adds:

Quoted 22 lines · Dan Stromberg
Quoted 22 lines
Quoted 3 lines · Dan Stromberg
Quoted 3 lines

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora

Core > > 3 both say that autofs supports replicated, readonly fileserver failover > > - but then there's a footnote of sorts that says autofs only supports it > > to the extent that mount does.

Quoted 4 lines

That part of the man page is old and slightly out of date.

The reason that this is left there is that autofs cannot support >

dynamic failover as it just uses mount. However, a different host may be

Quoted 2 lines

selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not >

explicitly dealt with yet.

I see.

Quoted 3 lines
Quoted 3 lines

Upon trying to do such a mount, I get:

Quoted 7 lines
Quoted 7 lines
Quoted 1 line
Quoted 1 line

seki-root> mount > >

dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs >

Quoted 1 line

mount: warning: multiple hostnames not supported > > Thu Jan 27

16:12:18

Quoted 1 line

What version of autofs are you using? > The autofs replicated server

code is still relatively new.

raven> But, as we know, mount doesn't know about multiple host raven> names. autofs breaks these out.

So what is the actual problem, here? Are you using the automounter? What do your config files look like?

Quoted 1 line
Quoted 1 line

FC3: autofs-4.1.3-28 RHEL3: autofs-4.1.3-47

raven> I believe that the replicated server code should be present in both raven> of these.

raven> Can you confirm please Jeff?

raven> Perhaps you are seeing a bug which needs to be addressed.

Yes, the replicated server code is present in both of these versions.

Quoted 11 lines
Quoted 11 lines

The FC3 is yum update'd fairly regulary, and the RHEL3 is up2date'd regularly as well.

Quoted 1 line

If your autofs supports replicated server map entries then multiple >

host mount requests will not reach the mount command.

Interesting.

Quoted 1 line

If you are using a RedHat based distro then check >

http://people.redhat.com/jmoyer > for the latest patched versions

Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 1 line

Also, you may need a kernel patch depending on your kernel

version. See > README.patches in the distribution or join the autofs list at > http://linux.kernel.org/mailman/listinfo/autofs

I'm certain my management will only go for this, in the short term, if it works on a mainstream RHEL3 system. Unfortunately, for me, the rest is academic interest.

raven> Once again I believe that the kernels mentioned here are up to date raven> wrt autofs.

raven> Certainly, the latest FC3 kernel is at 2.6.10 which has all the raven> autofs4 updates included in the base kernel.

raven> I believe the latest update to RHEL3 is also up to date. Jeff?

Yes, both kernels have the necessary patches to support replicated server.

raven> So perhaps you could send a log trace with the "--debug" option raven> added to the master map entry.

And please include the contents of your maps!

-Jeff

#5 lore raw
Quoted 2 lines · Jeff Moyer

So what is the actual problem, here? Are you using the automounter? What do your config files look like?

I guess the problems are:

1) I haven't looked into this very far
2) I was beginning to think I shouldn't continue looking into this because of the red herring in the man page
3) I've been trying sun-style automount maps only (copied from a sun), and I'm not really sure if linux' autofs is compatible with exactly the same format

Quoted 5 lines

raven> Can you confirm please Jeff?

raven> Perhaps you are seeing a bug which needs to be addressed.

Yes, the replicated server code is present in both of these versions.

Sweet.

Quoted 7 lines

raven> Once again I believe that the kernels mentioned here are up to date raven> wrt autofs.

raven> Certainly, the latest FC3 kernel is at 2.6.10 which has all the raven> autofs4 updates included in the base kernel.

Quoted 8 lines

raven> I believe the latest update to RHEL3 is also up to date. Jeff?

Yes, both kernels have the necessary patches to support replicated server.

raven> So perhaps you could send a log trace with the "--debug" option raven> added to the master map entry.

And please include the contents of your maps!

I've attached a shar archive of the two relevant files that we use on Solaris.

Quoted 1 line
#6 lore raw
In reply to Jeff Moyer
Quoted 77 lines · Jeff Moyer

==> Regarding Re: [NFS] NFS readonly failover and linux?; Ian Kent <[email protected]> adds:

Quoted 22 lines · Dan Stromberg
Quoted 22 lines
Quoted 3 lines · Dan Stromberg
Quoted 3 lines

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora

Core > > 3 both say that autofs supports replicated, readonly fileserver failover > > - but then there's a footnote of sorts that says autofs only supports it > > to the extent that mount does.

Quoted 4 lines

That part of the man page is old and slightly out of date.

The reason that this is left there is that autofs cannot support >

dynamic failover as it just uses mount. However, a different host may be

Quoted 2 lines

selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not >

explicitly dealt with yet.

I see.

Quoted 3 lines
Quoted 3 lines

Upon trying to do such a mount, I get:

Quoted 7 lines
Quoted 7 lines
Quoted 1 line
Quoted 1 line

seki-root> mount > >

dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs >

Quoted 1 line

mount: warning: multiple hostnames not supported > > Thu Jan 27

16:12:18

Quoted 1 line

What version of autofs are you using? > The autofs replicated server

code is still relatively new.

raven> But, as we know, mount doesn't know about multiple host raven> names. autofs breaks these out.

So what is the actual problem, here? Are you using the automounter? What do your config files look like?

Quoted 1 line
Quoted 1 line

FC3: autofs-4.1.3-28 RHEL3: autofs-4.1.3-47

raven> I believe that the replicated server code should be present in both raven> of these.

raven> Can you confirm please Jeff?

raven> Perhaps you are seeing a bug which needs to be addressed.

Yes, the replicated server code is present in both of these versions.

Quoted 11 lines
Quoted 11 lines

The FC3 is yum update'd fairly regulary, and the RHEL3 is up2date'd regularly as well.

Quoted 1 line

If your autofs supports replicated server map entries then multiple >

host mount requests will not reach the mount command.

Interesting.

Quoted 1 line

If you are using a RedHat based distro then check >

http://people.redhat.com/jmoyer > for the latest patched versions

Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 1 line

Also, you may need a kernel patch depending on your kernel

version. See > README.patches in the distribution or join the autofs list at > http://linux.kernel.org/mailman/listinfo/autofs

I'm certain my management will only go for this, in the short term, if it works on a mainstream RHEL3 system. Unfortunately, for me, the rest is academic interest.

raven> Once again I believe that the kernels mentioned here are up to date raven> wrt autofs.

raven> Certainly, the latest FC3 kernel is at 2.6.10 which has all the raven> autofs4 updates included in the base kernel.

raven> I believe the latest update to RHEL3 is also up to date. Jeff?

Quoted 8 lines

Yes, both kernels have the necessary patches to support replicated server.

raven> So perhaps you could send a log trace with the "--debug" option raven> added to the master map entry.

And please include the contents of your maps!

-Jeff

Here are the maps we use on Solaris 9. Should they work the same way on RHEL 3?

autoinst-strombrg> cat /etc/auto_dcslib
/dcs -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

autoinst-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
/xfn            -xfn

/- auto_direct

maintainer
#7 lore raw
Quoted 78 lines · Dan Stromberg
Quoted 77 lines · Jeff Moyer

==> Regarding Re: [NFS] NFS readonly failover and linux?; Ian Kent <[email protected]> adds:

Quoted 22 lines · Dan Stromberg
Quoted 22 lines
Quoted 3 lines · Dan Stromberg
Quoted 3 lines

The autofs man pages on Redhat Enterprise Linux 3 as well as Fedora

Core > > 3 both say that autofs supports replicated, readonly fileserver failover > > - but then there's a footnote of sorts that says autofs only supports it > > to the extent that mount does.

Quoted 4 lines

That part of the man page is old and slightly out of date.

The reason that this is left there is that autofs cannot support >

dynamic failover as it just uses mount. However, a different host may be

Quoted 2 lines

selected at mount, after a previous timeout, for example. The issue of umounting existing mounts from servers that have gone away is not >

explicitly dealt with yet.

I see.

Quoted 3 lines
Quoted 3 lines

Upon trying to do such a mount, I get:

Quoted 7 lines
Quoted 7 lines
Quoted 1 line
Quoted 1 line

seki-root> mount > >

dcslib1.nacs.uci.edu,dcslib4.nacs.uci.edu:/dcspdb/rhel-3-i686 /mnt/nfs >

Quoted 1 line

mount: warning: multiple hostnames not supported > > Thu Jan 27

16:12:18

Quoted 1 line

What version of autofs are you using? > The autofs replicated server

code is still relatively new.

raven> But, as we know, mount doesn't know about multiple host raven> names. autofs breaks these out.

So what is the actual problem, here? Are you using the automounter? What do your config files look like?

Quoted 1 line
Quoted 1 line

FC3: autofs-4.1.3-28 RHEL3: autofs-4.1.3-47

raven> I believe that the replicated server code should be present in both raven> of these.

raven> Can you confirm please Jeff?

raven> Perhaps you are seeing a bug which needs to be addressed.

Yes, the replicated server code is present in both of these versions.

Quoted 11 lines
Quoted 11 lines

The FC3 is yum update'd fairly regulary, and the RHEL3 is up2date'd regularly as well.

Quoted 1 line

If your autofs supports replicated server map entries then multiple >

host mount requests will not reach the mount command.

Interesting.

Quoted 1 line

If you are using a RedHat based distro then check >

http://people.redhat.com/jmoyer > for the latest patched versions

Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 1 line

Also, you may need a kernel patch depending on your kernel

version. See > README.patches in the distribution or join the autofs list at > http://linux.kernel.org/mailman/listinfo/autofs

I'm certain my management will only go for this, in the short term, if it works on a mainstream RHEL3 system. Unfortunately, for me, the rest is academic interest.

raven> Once again I believe that the kernels mentioned here are up to date raven> wrt autofs.

raven> Certainly, the latest FC3 kernel is at 2.6.10 which has all the raven> autofs4 updates included in the base kernel.

raven> I believe the latest update to RHEL3 is also up to date. Jeff?

Quoted 9 lines
Quoted 8 lines

Yes, both kernels have the necessary patches to support replicated server.

raven> So perhaps you could send a log trace with the "--debug" option raven> added to the master map entry.

And please include the contents of your maps!

-Jeff

Short answer is no.

Quoted 5 lines

Here are the maps we use on Solaris 9. Should they work the same way on RHEL 3?

autoinst-strombrg> cat /etc/auto_dcslib
/dcs -ro

^^^^
Single level direct mount entries don't yet work.

Quoted 4 lines

dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

Quoted 8 lines

autoinst-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
/xfn            -xfn

/- auto_direct

                 ^^^^^^^^^^^ Don't you mean auto_dcslib?
Quoted 3 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#8 lore raw
Quoted 7 lines · Ian Kent
Quoted 4 lines
Quoted 3 lines

And please include the contents of your maps!

-Jeff

Short answer is no.

Quoted 7 lines
Quoted 5 lines

Here are the maps we use on Solaris 9. Should they work the same way on RHEL 3?

autoinst-strombrg> cat /etc/auto_dcslib
/dcs -ro

^^^^
Single level direct mount entries don't yet work.

What if we set up indirect mounts for /foo/dcs and /foo/dcslib, and then had symlinks from /dcs and /dcslib?

Quoted 12 lines
Quoted 4 lines

dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

Quoted 8 lines

autoinst-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
/xfn            -xfn

/- auto_direct

Quoted 1 line
                 ^^^^^^^^^^^ Don't you mean auto_dcslib?

Apologies. I got these maps from a system on which they were only vestigial. Here are the maps from a system that's actually doing this :) :

data-strombrg> cat /etc/auto_dcslib
/dcs -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

data-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
#/xfn           -xfn

/- auto_dcslib
/- auto_dcs

Quoted 3 lines
Quoted 2 lines
#9 lore raw
Quoted 12 lines · Dan Stromberg
Quoted 10 lines · Ian Kent
Quoted 4 lines
Quoted 3 lines

And please include the contents of your maps!

-Jeff

Short answer is no.

Quoted 3 lines

Here are the maps we use on Solaris 9. Should they work the same way on RHEL 3?

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

autoinst-strombrg> cat /etc/auto_dcslib
/dcs -ro

^^^^
Single level direct mount entries don't yet work.

What if we set up indirect mounts for /foo/dcs and /foo/dcslib, and then had symlinks from /dcs and /dcslib?

That should work fine.

Quoted 29 lines
Quoted 13 lines
Quoted 5 lines

dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

Quoted 8 lines

autoinst-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
/xfn            -xfn

/- auto_direct

Quoted 1 line
                 ^^^^^^^^^^^ Don't you mean auto_dcslib?

Apologies. I got these maps from a system on which they were only vestigial. Here are the maps from a system that's actually doing this :) :

data-strombrg> cat /etc/auto_dcslib
/dcs -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspdb/sun4-5 /dcslib -ro dcslib1.nacs.uci.edu,dcslib2.nacs.uci.edu,dcslib3.nacs.uci.edu:/dcspda

data-strombrg> cat /etc/auto_master
# Master map for automounter
#
+auto.master

Quoted 6 lines
/net            -hosts          -nosuid,nobrowse
#/home          auto_home       -nobrowse
#/xfn           -xfn

/- auto_dcslib
/- auto_dcs

Your hosts map won't work. It will be ignored. You can use the auto.net program map in the distribution to give similar functionality.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs

#10 lore raw

==> Regarding Re: [NFS] NFS readonly failover and linux?; [email protected] adds:

raven> Your hosts map won't work. It will be ignored. You can use the raven> auto.net program map in the distribution to give similar raven> functionality.

Perhaps it's time we just translated that. I mean, it's not that difficult, and would bring us that much closer to compatibility.

-Jeff

#11 lore raw
Quoted 8 lines · Jeff Moyer

==> Regarding Re: [NFS] NFS readonly failover and linux?; [email protected] adds:

raven> Your hosts map won't work. It will be ignored. You can use the raven> auto.net program map in the distribution to give similar raven> functionality.

Perhaps it's time we just translated that. I mean, it's not that difficult, and would bring us that much closer to compatibility.

Perhaps but I'd like to do a proper hosts modulei, but in the meantime, why not.

Ian

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs