Skip to contentSkip to conversation

Mapping between PEs and Logical Volumes - Remapping of PEs in a Volume Group whic is on one PV

linux-lvm [email protected] 2 participants 3 messages Feb 6, 2005

lore
Share & tools
lore
#0 lore raw

Ok i have figured it out that
lvdisplay -m
command shows the mapping of PEs and Logical Volumes.
and in my case it shows that total PEs are 266 that means from 0 to 265, allocated are 224 and 42 are free PEs

Logical Volume 0 is from 0 to 191 PEs = 192 PEs
and Logical Volume 1 is from 233 to 264 = 32 PEs
so total is 224 PEs

and in between these 2 logical volumes 41 PEs(PE# 191 to 232) are free and 1 PE (PE#265) is free at the end after 2nd logical Volume. Now i want to be LogVols in VolGroup to be contiguous physically, such that logical Volume 0 remains on 0 to 191 PEs and logical volume 1 should start from PE 192 and finishes at PE 223.

I figured it out that for this shuffling of PEs the command should be,

# pvmove -v /dev/hda6:233-264 /dev/hda6:192-223

which gives following error

Finding volume group "VolGroup00"
No extents available for allocation

or

# pvmove -v -n /dev/Volgroup00/logVol01 /dev/hda6 /dev/hda6:192-223

which gives following error

Named LV and old PV must be in the same VG
pvmove: Move extents from one physical volume to another

in both cases i cant figure out what is the problem as there are PEs available and also LV and the "old PV" infact are in same VG.

I have also tried the simple command

# pvmove -v -n /dev/Volgroup00/logVol01
which does not give any error, but do nothing as the mapping remains
same.

anybody here to help me out?

-ajeet.

Quoted 14 lines · On Sun, 06 Feb 2005 07:44:25 -0800, [email protected] said:

Hi,

I have one Volume Group and it contains two Logical Volumes. There are many free PEs in Volume Group.
I want to know which PEs inside a Physical Volume(Volume Group) are assigned to which Logical Volume.

So which command shows this.

Thanks.

-ajeet.

#1 lore raw

Re: [linux-lvm] Mapping between PEs and Logical Volumes - Remapping ofP Es in a Volume Group which is on one PV

Quoted 37 lines · On Sun, 06 Feb 2005 10:20:05 -0800, [email protected] said:

Ok i have figured it out that
lvdisplay -m
command shows the mapping of PEs and Logical Volumes.
and in my case it shows that total PEs are 266 that means from 0 to 265, allocated are 224 and 42 are free PEs

Logical Volume 0 is from 0 to 191 PEs = 192 PEs
and Logical Volume 1 is from 233 to 264 = 32 PEs
so total is 224 PEs

and in between these 2 logical volumes 41 PEs(PE# 191 to 232) are free and 1 PE (PE#265) is free at the end after 2nd logical Volume. Now i want to be LogVols in VolGroup to be contiguous physically, such that logical Volume 0 remains on 0 to 191 PEs and logical volume 1 should start from PE 192 and finishes at PE 223.

I figured it out that for this shuffling of PEs the command should be,

# pvmove -v /dev/hda6:233-264 /dev/hda6:192-223

which gives following error

Finding volume group "VolGroup00"
No extents available for allocation

or

# pvmove -v -n /dev/Volgroup00/logVol01 /dev/hda6 /dev/hda6:192-223

which gives following error

Named LV and old PV must be in the same VG
pvmove: Move extents from one physical volume to another

in both cases i cant figure out what is the problem as there are PEs available and also LV and the "old PV" infact are in same VG.

Quoted 6 lines

I have also tried the simple command

# pvmove -v -n /dev/Volgroup00/logVol01
which does not give any error, but do nothing as the mapping remains
same.

anybody here to help me out?

After reading archives i findout that this command may help which infact worked.

# pvmove -v --alloc anywhere /dev/hda6:233-164 /dev/hda6:192-223

but this --alloc option is not mentioned in man page!!
also does anybody know what other options(Allocation Type) can be used with --alloc?

Quoted 18 lines

-ajeet.

Quoted 14 lines · On Sun, 06 Feb 2005 07:44:25 -0800, [email protected] said:

Hi,

I have one Volume Group and it contains two Logical Volumes. There are many free PEs in Volume Group.
I want to know which PEs inside a Physical Volume(Volume Group) are assigned to which Logical Volume.

So which command shows this.

Thanks.

-ajeet.

#2 lore raw

Re: [linux-lvm] Mapping between PEs and Logical Volumes - Remapping ofP Es in a Volume Group which is on one PV

Quoted 1 line · Ajeet Nankani

but this --alloc option is not mentioned in man page!!

It's mentioned on the 'lvm' man page as still under development. pvmove is the first command to make use of 'anywhere'.

Alasdair

Signature · 1 line
[email protected]