Skip to contentSkip to conversation

Where is a reference for ioctl32() usage?

DISCUSSION Alan Kilian 2 participants 3 messages Mar 17, 2005 – Mar 18, 2005

lore
Share & tools
lore
#0 lore raw

Thanks for all the help in the past, and I'm once again knocking at your door for more help.

I am trying to get my PCI bus device driver running on an Xeon 64-bit FC-3 distribution.

I got the compiler warnings all cleaned up, the driver compiles and loads, but the test executable which was compiled on a 32-bit FC-3 distribution is causing these messages in /var/log/messages:

Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(8004440e){00} arg(ffffd824) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(8004440e){00} arg(ffffd8c4) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(40044414){00} arg(00000000) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(80044403){00} arg(0804f780) on /dev/sse0

It's probably a simple thing to change my ioctl() interface in the driver, but I googled myself blue in the face, and I didn't find it, so I come to you, hat-in-hand for help.

Where can I find out how to change my driver so I can have a 32-bit executable talk to it using ioctl()?

I did change the "type" argument in _IOR and _IOW to uint32_t from int, but that didn't change things.

-Alan

Signature · 1 line
- Alan Kilian <kilian(at)bobodyne.com>
#1 lore raw

Thanks for all the help in the past, and I'm once again knocking at your door for more help.

I am trying to get my PCI bus device driver running on an Xeon 64-bit FC-3 distribution for the first time. It works fine on a 32-bit FC-3 distribution.

I got the compiler warnings all cleaned up, the driver compiles and loads, but the test executable which was compiled on a 32-bit FC-3 distribution is causing these messages in /var/log/messages:

Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(8004440e){00} arg(ffffd824) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(8004440e){00} arg(ffffd8c4) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(40044414){00} arg(00000000) on /dev/sse0 Mar 17 15:42:55 noble kernel: ioctl32(boardtest:3730):
Unknown cmd fd(3) cmd(80044403){00} arg(0804f780) on /dev/sse0

It's probably a simple thing to change my ioctl() interface in the driver, but I googled myself blue in the face, and I didn't find it, so I come to you, hat-in-hand for help.

Where can I find out how to change my driver so I can have a 32-bit executable talk to it using ioctl()?

I did change the "type" argument in _IOR and _IOW to uint32_t from int, but that didn't change things.

-Alan

Signature · 1 line
- Alan Kilian <kilian(at)bobodyne.com>
#2 lore raw
Quoted 3 lines · Alan Kilian

I am trying to get my PCI bus device driver running on an Xeon 64-bit FC-3 distribution for the first time. It works fine on a 32-bit FC-3 distribution.

You should add a compat_ioctl file operation, see
http://lwn.net/Articles/119652/. If your ioctl handler is 64/32 bit clean, you can have a single function for both unlocked_ioctl and compat_ioctl.

Arnd <><