Skip to contentSkip to conversation

bcm203x broadcom dongle firmware upload fails...

DISCUSSION Soeren Sonnenburg 2 participants 3 messages Mar 19, 2005 – Mar 20, 2005

lore
Share & tools
lore
#0 lore raw

hi,

I don't see why, it used to work reliably at some point but now it does not. It even won't work without hotplug and then manually typing:

echo 1 > /sys/class/firmware/2-1/loading
cat /lib/firmware/BCM2033-FW.bin >/sys/class/firmware/2-1/data echo 0 > /sys/class/firmware/2-1/loading

usb 2-1: new full speed USB device using ohci_hcd and address 2
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
bcm203x_probe: Mini driver request failed
bcm203x: probe of 2-1:1.0 failed with error -5
usbcore: registered new driver bcm203x

It does not work with kernel 2.6.10/11 any ideas ?

Soeren

Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.
#1 lore raw

Hi Soeren,

Quoted 7 lines

I don't see why, it used to work reliably at some point but now it does not. It even won't work without hotplug and then manually typing:

echo 1 > /sys/class/firmware/2-1/loading
cat /lib/firmware/BCM2033-FW.bin >/sys/class/firmware/2-1/data echo 0 > /sys/class/firmware/2-1/loading

Quoted 7 lines

usb 2-1: new full speed USB device using ohci_hcd and address 2
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
bcm203x_probe: Mini driver request failed
bcm203x: probe of 2-1:1.0 failed with error -5
usbcore: registered new driver bcm203x

It does not work with kernel 2.6.10/11 any ideas ?

I think this is a general request_firmware() problem. Check the Hotplug mailing list archive. Hannes, Kay and Greg discussed problems with the firmware_class and udev. I haven't found the time to look at it.

Regards

Marcel

#2 lore raw
Quoted 1 line · Marcel Holtmann

Hi Soeren,

[firmware upload not working]

Quoted 5 lines
Quoted 1 line

It does not work with kernel 2.6.10/11 any ideas ?

I think this is a general request_firmware() problem. Check the Hotplug mailing list archive. Hannes, Kay and Greg discussed problems with the firmware_class and udev. I haven't found the time to look at it.

Just for reference that is the link to their thread form March 15:
http://sourceforge.net/mailarchive/message.php?msg_id=11165076

If it is an udev issue it would explain why the dongle was working when plugged in before the booting the machine.

If there is a patch flying around that is supposed to fix this issue, please let me know!

Best,
Soeren

Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.