Skip to contentSkip to conversation

What does 'WrongLevel' mean in RAID0 ?

DISCUSSION J.A. Magallon 2 participants 3 messages Apr 12, 2005

lore
Share & tools
lore
#0 lore raw

Hi all...

I have a RAID0 setup on top of three IDE drives.
mdadm monitor sends me mesages with:

DeviceDisappeared
/dev/md0
Wrong-Level

The RAID seems to be working well. Any pointer on what does this mean ?

PD: I know it is a bit strange raid, see:

annwn:~# cat /proc/partitions
major minor  #blocks  name
   3     0  245117376 hda
   3     1  245111706 hda1
  22     0  117220824 hdc
  22     1  117218241 hdc1
  22    64  117220824 hdd
  22    65  117218241 hdd1
annwn:~# mdadm -D /dev/md0
/dev/md0:
        Version : 00.90.01
  Creation Time : Mon Sep 13 17:57:08 2004
     Raid Level : raid0
     Array Size : 479547968 (457.33 GiB 491.06 GB)
   Raid Devices : 3
  Total Devices : 3
Preferred Minor : 0
    Persistence : Superblock is persistent

Update Time : Mon Sep 13 17:57:08 2004
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0

Chunk Size : 64K

UUID : c7c5ec26:ae5a99f9:49fec7a1:7e0dcc69
Events : 0.12

Number Major Minor RaidDevice State
0 3 1 0 active sync /dev/hda1
1 22 1 1 active sync /dev/hdc1
2 22 65 2 active sync /dev/hdd1

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Limited Edition 2005) for i586 Linux 2.6.11-jam14 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #3

#1 lore raw
Quoted 11 lines · On Tuesday April 12, [email protected] wrote:

Hi all...

I have a RAID0 setup on top of three IDE drives.
mdadm monitor sends me mesages with:

DeviceDisappeared
/dev/md0
Wrong-Level

The RAID seems to be working well. Any pointer on what does this mean ?

From "man mdadm" (if you know where to look)

Follow or Monitor
Monitor one or more md devices and act on any state changes. This is only meaningful for raid1, 4, 5, 6 or multipath arrays as only these have interesting state. raid0 or linear never have missing, spare, or failed drives, so there is nothing to monitor.

You are presumably trying to monitor a raid0 (which isn't meaningful) and mdadm is telling you (in its own idiosyncratic way) that it isn't going to monitor it.

NeilBrown

#2 lore raw
Quoted 22 lines · Neil Brown
Quoted 11 lines · On Tuesday April 12, [email protected] wrote:

Hi all...

I have a RAID0 setup on top of three IDE drives.
mdadm monitor sends me mesages with:

DeviceDisappeared
/dev/md0
Wrong-Level

The RAID seems to be working well. Any pointer on what does this mean ?

From "man mdadm" (if you know where to look)

Follow or Monitor
Monitor one or more md devices and act on any state changes. This is only meaningful for raid1, 4, 5, 6 or multipath arrays as only these have interesting state. raid0 or linear never have missing, spare, or failed drives, so there is nothing to monitor.

Quoted 4 lines

You are presumably trying to monitor a raid0 (which isn't meaningful) and mdadm is telling you (in its own idiosyncratic way) that it isn't going to monitor it.

Thank you very much !! One less mistery in my life ;)

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Limited Edition 2005) for i586 Linux 2.6.11-jam14 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #3