Decrementer interrupt in U-boot
I am running u-boot on a custom board based on MPC885ADS and debugging it with BDI2000.
U-boot hangs at a point and BDI2000 shows "Debug entry cause : decrementer interrupt".
After that if I do a TI in BDI2000 and then GO, u-boot runs properly and gives no error then afterwards.
But due to this I am not able to run U-boot without debugger. Can anyone give some suggestion regarding how to solve this problem?
Signature · 2 lines
View this message in context: http://www.nabble.com/Decrementer-interrupt-in-U-boot-tf3926185.html#a11134269 Sent from the Uboot - Users mailing list archive at Nabble.com.