stdio.h and kernel space
I believe that stdio.h is used only in user space. If I am correct that can anybody please tell me why lld.c, low level driver for AMD CFI flash, contains stdio.h as header file?
Signature · 1 line
Munira Ahmed
Quoted 3 lines · Munira Ahmed
I believe that
stdio.his used only in user space. If I am correct that can anybody please tell me whylld.c, low level driver for AMD CFI flash, containsstdio.has header file?
You are correct, stdio.h is for userspace. However I do not see the file lld.c in any standard kernel tree, either version 2.4 or 2.6. Where did you get your kernel source from, which version is it, and what patches have been applied to it?
-R
They are not part of the kernel. I downloaded then from AMD's website and would like to know how to use them
Quoted 16 lines · Ralph Siemsen
Quoted 3 lines · Munira Ahmed
I believe that
stdio.his used only in user space. If I am correct that can anybody please tell me whylld.c, low level driver for AMD CFI flash, containsstdio.has header file?You are correct,
stdio.his for userspace. However I do not see the filelld.cin any standard kernel tree, either version 2.4 or 2.6. Where did you get your kernel source from, which version is it, and what patches have been applied to it?-R
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Signature · 27 lines
Munira Ahmed Senior Embedded Specialist Radixs Pte Ltd Email:[email protected] Main: +65 6335 8600 Fax: +65 6335 8601 URL: www.radixs.com 1 Temasek Avenue, #21-01, Millenia Tower, Singapore 039192 Disclaimer Notice: This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be confidential and privileged. Any unauthorised disclosure or use or dissemination of the information contained herein, either whole or partial, is prohibited. Radixs Pte Ltd (Radixs) cannot accept liability for any statements made which are clearly the sender's own and not expressly made on behalf of Radixs or one of its agents. If you have received this message in error, please notify the sender immediately, and delete this email from your computer system. Radixs has taken reasonable precaution to ensure no viruses are present in this email, however Radixs does not accept responsibility for any loss or damage arising from the use of this email or attachments. Co. Reg. 200104892Z
Quoted 2 lines · Munira Ahmed
They are not part of the kernel. I downloaded then from AMD's website and would like to know how to use them
Okay that explains why I didn't have them :)
There is a good chance that the MTD code in the linux kernel already supports whatever chip you have (not sure if you mentioned its type)... the CFI support is pretty solid.
-R
S29WSxxxN. Does not seem to be supported
Quoted 12 lines · Ralph Siemsen
Quoted 2 lines · Munira Ahmed
They are not part of the kernel. I downloaded then from AMD's website and would like to know how to use them
Okay that explains why I didn't have them :)
There is a good chance that the MTD code in the linux kernel already supports whatever chip you have (not sure if you mentioned its type)... the CFI support is pretty solid.
-R
Signature · 1 line
Munira Ahmed
Quoted 1 line · Munira Ahmed
S29WSxxxN. Does not seem to be supported
According to datasheet the programming sequence looks rather like the JEDEC standard method found in drivers/mtd/chips/jedec_probe.c, particularly the jedec_reset() function matches the code shown on page 28 of the datasheet.
Datasheet i'm looking at is http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/s29ws-n_00_g0_e.pdf hopefully this is the right one ;)
So the standard driver might just need an extra entry for vendor/device codes. Maybe ;)
-R
Hi Ralph
The datasheet you are referring to is the right one and S29WSxxxN is using JEDEC 42.4 command set standard.
I am not sure which JEDEC standard is impelmented by jedec_prob.c.
Further if a separate driver is provided on AMD's website it must significantly be different otherwise they could simply have mentioned about the one in jedec_probe.c
I believe that S29WSxxxN's MirrirBit technology provides many more security features as yet not available in other flash technologies.
Recently they have sent me even a new version so now I have to study that one and see how could that one be used.
Thanks for taking the trouble of going through the specs and the kernel as well.
It really amazes me how keen people are to help each other. I have got many problems solved by the wonderful community help.
Regards and thanks to all
Quoted 17 lines · Ralph Siemsen
Quoted 1 line · Munira Ahmed
S29WSxxxN. Does not seem to be supported
According to datasheet the programming sequence looks rather like the JEDEC standard method found in
drivers/mtd/chips/jedec_probe.c, particularly thejedec_reset()function matches the code shown on page 28 of the datasheet.Datasheet i'm looking at is
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/s29ws-n_00_g0_e.pdf
hopefully this is the right one ;)So the standard driver might just need an extra entry for vendor/device codes. Maybe ;)
-R
Signature · 1 line
Munira Ahmed
Quoted 10 lines · Munira Ahmed
Hi Ralph
The datasheet you are referring to is the right one and S29WSxxxN is using JEDEC 42.4 command set standard.
I am not sure which JEDEC standard is impelmented by
jedec_prob.c.Further if a separate driver is provided on AMD's website it must significantly be different otherwise they could simply have mentioned about the one in
jedec_probe.c
jedec_probe is not a ``driver'' it is a method of identify the kind of device you have. Like a pci bus scan just a little less reliable. Unless something is very strange it is almost certain either jedec_probe or cfi_probe will be able to recognize the id on your part, and direct the mtd code to the appropriate driver. Which is almost certainly cfi_cmdset_0002.c. If the command set really is different or provides significant new features writing a new chip driver may be in order.
Quoted 2 lines
I believe that S29WSxxxN's MirrirBit technology provides many more security features as yet not available in other flash technologies.
Possibly. Although I don't quite see how more silicon to audit translates into more security. In any event audit the code I have mentioned and see if it appears to be doing the correct thing for your chip.
Eric
Hang on
I am confused now
cfi_cmdset_0002.c implements CFI or a flash driver?
What I understand from is that
there is one cfi command set just to find out which chip is being used and what driver to use.
The other one is the software command set to tell the flash what to do.This command set would essentially constitute the driver.
earlier there used to be a JEDEC standard before CFI came in vogue. It used to do the same thing which is now done by CFI albeit in some old fashioned or may be in not so efficient way. there must be something missing in there that's why it is getting out of use. jedec_probe.c if I am not wrong implements this standard which is almost obsolete.
Now this S29WSxxxN is CFI compliant and uses a software command set called JEDEC 42.4 standard to instruct the flash. So CFI in the kernel should be able to identify that which chip is used.
No which file in the kernel implements CFI?
how to tell this CFI to use a new driver?
which file if any in the kerenl implements JEDEC 42.2 command set to instruct a flash?
Please clearify
Quoted 30 lines · Eric W. Biederman
Quoted 10 lines · Munira Ahmed
Hi Ralph
The datasheet you are referring to is the right one and S29WSxxxN is using JEDEC 42.4 command set standard.
I am not sure which JEDEC standard is impelmented by
jedec_prob.c.Further if a separate driver is provided on AMD's website it must significantly be different otherwise they could simply have mentioned about the one in
jedec_probe.c
jedec_probeis not a ``driver'' it is a method of identify the kind of device you have. Like a pci bus scan just a little less reliable. Unless something is very strange it is almost certain eitherjedec_probeorcfi_probewill be able to recognize the id on your part, and direct the mtd code to the appropriate driver. Which is almost certainlycfi_cmdset_0002.c. If the command set really is different or provides significant new features writing a new chip driver may be in order.Quoted 2 lines
I believe that S29WSxxxN's MirrirBit technology provides many more security features as yet not available in other flash technologies.
Possibly. Although I don't quite see how more silicon to audit translates into more security. In any event audit the code I have mentioned and see if it appears to be doing the correct thing for your chip.
Eric
Signature · 1 line
Munira Ahmed
Quoted 5 lines · Munira Ahmed
Hang on
I am confused now
cfi_cmdset_0002.cimplements CFI or a flash driver?
Breaking things down a little more, in the mtd stack there are 3 kinds of drivers. map drivers that describe how to talk to a given flash chip.
probe drivers that identify what kind of chip you have.
chip drivers that know how to speak a command set and let you flash your chip.
Quoted 4 lines
What I understand from is that
there is one cfi command set just to find out which chip is being used and what driver to use.
There is a probe driver. Not a really a command set, but you have the idea.
There are two JEDEC standard probe methods the original which simply gives vendor/device id bytes. And the CFI probe which gives you a little more and means you don't need a table of devices.
Quoted 2 lines
The other one is the software command set to tell the flash what to do.This command set would essentially constitute the driver.
Yes.
Quoted 5 lines
earlier there used to be a JEDEC standard before CFI came in vogue. It used to do the same thing which is now done by CFI albeit in some old fashioned or may be in not so efficient way. there must be something missing in there that's why it is getting out of use.
jedec_probe.cif I am not wrong implements this standard which is almost obsolete.
The CFI standard seems to be a reaction to the observation that the largest part of a flash driver that supports multiple chips is the lookup table by vendor/device that reports the commands set and chip size. After that everything tends to use either the intel (cfi_cmdset_0001) or the amd (cfi_cmdset_0002) command set.
It really depends on which market segment you are in which probe methods are supported. In addition most CFI chips also support the older style jedec probe as well.
Quoted 5 lines
Now this S29WSxxxN is CFI compliant and uses a software command set called JEDEC 42.4 standard to instruct the flash. So CFI in the kernel should be able to identify that which chip is used.
No which file in the kernel implements CFI?
cfi_probe.
Quoted 1 line
how to tell this CFI to use a new driver?
cfi_probe should run on the chip find it and then complain that it can't find some property. So as long as you have an appropriate map driver that calls cfi_probe you should be 90% of the way there and the error messages should be able to guide you in.
Quoted 2 lines
which file if any in the kerenl implements JEDEC 42.2 command set to instruct a flash?
JEDEC 42.2 is not a clear reference to me, but I do know that JEDEC has a standard command set that is very similar to what AMD uses. CFI enumerates several known commands sets. Which enumeration value does it describe your command set with. My hunch is that the CFI probe
data returns the value 0002. Once you know which value the
CFI probe data returns then we can talk about adding code.
Eric
which module in the kernel calls cfi_probe driver to get the chip details.
when I do probe with a device with intel flash using
mtdptr = do_map_probe("cfi_probe", mapptr);
this is what I get
genprobe_new_chip called with unsupported buswidth 0
CFI: Found no <NULL> device at location zero
and mtdptr is returned NULL
what does it signify?
?
Quoted 74 lines · Eric W. Biederman
Quoted 5 lines · Munira Ahmed
Hang on
I am confused now
cfi_cmdset_0002.cimplements CFI or a flash driver?Breaking things down a little more, in the mtd stack there are 3 kinds of drivers. map drivers that describe how to talk to a given flash chip.
probe drivers that identify what kind of chip you have.
chip drivers that know how to speak a command set and let you flash your chip.Quoted 4 lines
What I understand from is that
there is one cfi command set just to find out which chip is being used and what driver to use.
There is a probe driver. Not a really a command set, but you have the idea.
There are two JEDEC standard probe methods the original which simply gives vendor/device id bytes. And the CFI probe which gives you a little more and means you don't need a table of devices.
Quoted 2 lines
The other one is the software command set to tell the flash what to do.This command set would essentially constitute the driver.
Yes.
Quoted 5 lines
earlier there used to be a JEDEC standard before CFI came in vogue. It used to do the same thing which is now done by CFI albeit in some old fashioned or may be in not so efficient way. there must be something missing in there that's why it is getting out of use.
jedec_probe.cif I am not wrong implements this standard which is almost obsolete.The CFI standard seems to be a reaction to the observation that the largest part of a flash driver that supports multiple chips is the lookup table by vendor/device that reports the commands set and chip size. After that everything tends to use either the intel (
cfi_cmdset_0001) or the amd (cfi_cmdset_0002) command set.It really depends on which market segment you are in which probe methods are supported. In addition most CFI chips also support the older style jedec probe as well.
Quoted 5 lines
Now this S29WSxxxN is CFI compliant and uses a software command set called JEDEC 42.4 standard to instruct the flash. So CFI in the kernel should be able to identify that which chip is used.
No which file in the kernel implements CFI?
cfi_probe.Quoted 1 line
how to tell this CFI to use a new driver?
cfi_probeshould run on the chip find it and then complain that it can't find some property. So as long as you have an appropriate map driver that callscfi_probeyou should be 90% of the way there and the error messages should be able to guide you in.Quoted 2 lines
which file if any in the kerenl implements JEDEC 42.2 command set to instruct a flash?
JEDEC 42.2 is not a clear reference to me, but I do know that JEDEC has a standard command set that is very similar to what AMD uses. CFI enumerates several known commands sets. Which enumeration value does it describe your command set with. My hunch is that the CFI probe
data returns the value 0002. Once you know which value the
CFI probe data returns then we can talk about adding code.Eric
Signature · 27 lines
Munira Ahmed Senior Embedded Specialist Radixs Pte Ltd Email:[email protected] Main: +65 6335 8600 Fax: +65 6335 8601 URL: www.radixs.com 1 Temasek Avenue, #21-01, Millenia Tower, Singapore 039192 Disclaimer Notice: This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be confidential and privileged. Any unauthorised disclosure or use or dissemination of the information contained herein, either whole or partial, is prohibited. Radixs Pte Ltd (Radixs) cannot accept liability for any statements made which are clearly the sender's own and not expressly made on behalf of Radixs or one of its agents. If you have received this message in error, please notify the sender immediately, and delete this email from your computer system. Radixs has taken reasonable precaution to ensure no viruses are present in this email, however Radixs does not accept responsibility for any loss or damage arising from the use of this email or attachments. Co. Reg. 200104892Z