Skip to contentSkip to conversation

newbie downloading not working

LARTC Paulo Ricardo Bruck 2 participants 2 messages May 21, 2005 – May 22, 2005

lore
Share & tools
lore
#0 lore raw

Hi guys

Finally , after reading a lot of docs from larc/opalsoft/etc, I decided to start learning some QoS

First of all I'm trying to shape only download from a iptables+squid+qos machine for 4 machines at LAN ( eth0)

Can anyone help me , cause it is not working properly..

-----------------------------------------------------------------
#!/bin/bash

# 128Kbps 192.168.0.1
# <----- eth1 firewall eth0
# internet-adsl-----+squid---------------4 desktops
# -----> +QoS 192.168.0.5

#       450Kbps                                     .11
#                                                   .12
#                                                   .20

#

echo -e "calling modules\n"
modprobe sch_htb sch_prio sch_sfq cls_u32

echo -e "limiting download\n"

echo -e " deleting qdisc \n"
tc qdisc del dev eth0 root

echo -e "adding HTB and SFP/PFIFO as leaves\n"
tc qdisc add dev eth0 root handle 1:0 htb

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 400kbit ceil 400kbit

tc class add dev eth0 parent 1:1 classid 1:20 htb rate 300kbit ceil 400kbit
tc class add dev eth0 parent 1:1 classid 1:30 htb rate 10kbit ceil 400kbit
tc class add dev eth0 parent 1:1 classid 1:40 htb rate 10kbit ceil 400kbit
tc class add dev eth0 parent 1:1 classid 1:50 htb rate 10kbit ceil 400kbit
tc class add dev eth0 parent 1:1 classid 1:60 htb rate 10kbit ceil 400kbit

tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:30 handle 30: sfq perturb 10 tc qdisc add dev eth0 parent 1:40 handle 40: sfq perturb 10 tc qdisc add dev eth0 parent 1:50 handle 50: sfq perturb 10 tc qdisc add dev eth0 parent 1:60 handle 60: sfq perturb 10

tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.1 flowid 1:20
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.11 flowid 1:30
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.12 flowid 1:40
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.20 flowid 1:50
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.5 flowid 1:60

thx in advanced

Signature · 1 line
Paulo Ricardo Bruck - consultor

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 14 lines · Paulo Ricardo Bruck

Hi guys

Finally , after reading a lot of docs from larc/opalsoft/etc, I decided to start learning some QoS

First of all I'm trying to shape only download from a iptables+squid+qos machine for 4 machines at LAN ( eth0)

Can anyone help me , cause it is not working properly..

-----------------------------------------------------------------
#!/bin/bash

Quoted 8 lines

# 128Kbps 192.168.0.1
# <----- eth1 firewall eth0
# internet-adsl-----+squid---------------4 desktops
# -----> +QoS 192.168.0.5

#       450Kbps                                     .11
#                                                   .12
#                                                   .20

#

If you want to shape traffic from the internet to squid then you need to use imq (www.linuximq.net) set in kernel config to hook after prerouting nat. The traffic to squid will still have your internet address not 192.168.0.1.

Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc