Skip to contentSkip to conversation

izbalancing - a GNU/Linux Firewall/Router Bash Script

LARTC Ugo Viti 1 participant 1 message Jul 8, 2005

lore
Share & tools
lore

Ugo Viti

author
#0 lore raw

Hello,

i wrote a simple but useful (i hope) bash script featuring a easly and fastly configuration method for implementing a Linux Gateway feauturing Incoming/Outgoing MultiHomed/LoadBalanced Subsystem Management.

I want share this little script.

you can download a copy from the following address:

http://www.initzero.it/products/opensource/izbalancing/download/izbalancing

just save it in your hd and open it with a text editor (vi, emacs, gedit...) to configure the minimal variables.
the file it self contains istructions... just read.

don't forget to 'chmod 750 izbalancing' :-)

Follow the readme contained in the script file:

Best Regards

##############################################################################################
# What is this?
# ======# This bash script allow you to easly and fastly configure a complex Load Balancing Multi Homed Internet Gateway

# for inbound and outbound traffic

# Key Features:
# ======# - Multiple Balanced Default Gateway Configuration
# - Load Balanced outgoing connections from LAN to INTERNET connections
# - Management of multiple incoming connection from many INTERNET ISP lines to DMZ/LAN Servers
# - SystemV compliant script... you can run easly at boot up (like Red Hat, Fedora, SuSE, Mandrake, etc...) # - Automatically discover your local IP addresses... you can change your IP without reconfigure this script, just restart # - Start and Stop Cleanly your MultiHomed Configuration with simple command (izbalancing start|stop|restart) # - Adding new Internet Connections is very easy and fast
# - You only must know the TABLE ID to assign to the new line, Ethernet Name of your NIC, and the Router IP Address

# Requirements:
# ======# - GNU/Linux Firewall running Kernel >=2.6.10 (with iptables module CONNMARK available) # - Bash Shell >= 2.0
# - Standard GNU/Linux coreutils utilities (cat, echo, grep, if, etc...)
# - GNU Version of awk and sed utilities
# - GNU/Linux Netfilter user space utilities (iptables >= 1.2.11)
# - iproute2 utilities
# - Two or more Internet connections (also from different ISPs and IP classes)
# - An ethernet card for each ISP Router

# Tested On:
# =====
# - GNU/Linux Fedora Core 3 with 2 Internet Connections # - GNU/Linux Fedora Core 4 with 2 Internet Connections

# Script Usage:
# ======# 1) Configure or add the following variables:
# TABLEn = Table number of internet connection 'n'
# IFn = The Ethernet Interface name of internet connection 'n'
# GWn = The Router IP Address of Internet connection 'n'
# 2) Add a line for any internet connection in the izbalancing function
# 3) Modify the command "ip route add default equalize nexthop via ..." adding all ISP's Routers IP
# 4) Comment out the iptables rules
# 5) Save this file and execute it a boot time (for Red Hat systems you can copy this script in /etc/rc.d/init.d/ directory
# and launch 'chkconfig --add izbalancing')

# That's all...

Signature · 13 lines
Ugo Viti
Linux Red Hat Certified Engineer

InitZero S.r.l.
Via P. Calamandrei 24, 52100 Arezzo
Tel. +39 0575 1822155 - Fax. +39 0575 1822156
WWW: http://www.initzero.it
E-Mail: [email protected]

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc