Skip to contentSkip to conversation

DISCUSSION [email protected] 2 participants 2 messages Jul 26, 2005 – Jul 27, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I am currently using Slackware 10.1 with 2.4.29 kernel and encountered following problem:

I use Sagem Fast 800 ADSL modem of my provider and use my linux station as a router (iptables+masquerade). The problem is that after a few hours of working my linux crashes with the message:

"

serwer login: Unable to handle kernel NULL pointer dereference at virtual address 00000020
*pde = 00000000
0opss: 0002

CPU: 0

EIP: 0010:[<c4958ca3>] Not tainted
EFLAGS: 00010087
eax: c11c56 ebx:c11c56c8 ecx:c11a1604 edx: c3139e34
esi: 00000000 edi: c3139e34 ebp: c11c56dc esp: c3385f50
ds: 0018 es: 0018 ss: 0018
Process klogd (pid: 63, stackpage=c3385000)

Stack: 0000246 00000000 c111c5660 00000001 0000ff80 c4958d51 c11c5660 c11c5660
c3527ee0 04000001 c3385fc4 0000000a c0109fbd 0000000a c11c55660 c3385fc4
c03829a0 0000000a c3527ee0 c3385fc4 c010a138 0000000a c3385fc4  c3527ee0
Call Trace: [<c4958d51>] [<c0109fbd>] [<c010a138>] [<c010c428>]

Code: c7 46 20 98 ff ff ff 8b 43 10 8b 80 d8 00 00 00 8b 40 2c 8b

<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing"

I tried rekompiling the kernel and chose MMX architekture in "Processor Type and Features -> Processor Family" but it did not help. I also tried different versions of Sagem drivers but the problem is still present.

I am a newbie to linux and would be very thankful for any solutions or just hints about solving this problem. I don't know if the problem is caused by sagem drivers but on the second PC station (Athlon Xp2000+, 384 MB RAM, 80GB Samsung) nothing like this happened.

#1 lore raw
Quoted 20 lines · [email protected] wrote:

I am currently using Slackware 10.1 with 2.4.29 kernel and encountered following problem:

I use Sagem Fast 800 ADSL modem of my provider and use my linux station as a router (iptables+masquerade). The problem is that after a few hours of working my linux crashes with the message:

"

serwer login: Unable to handle kernel NULL pointer dereference at virtual address 00000020
*pde = 00000000
0opss: 0002

CPU: 0

EIP: 0010:[<c4958ca3>] Not tainted
EFLAGS: 00010087
eax: c11c56 ebx:c11c56c8 ecx:c11a1604 edx: c3139e34
esi: 00000000 edi: c3139e34 ebp: c11c56dc esp: c3385f50
ds: 0018 es: 0018 ss: 0018
Process klogd (pid: 63, stackpage=c3385000)

Quoted 8 lines
Stack: 0000246 00000000 c111c5660 00000001 0000ff80 c4958d51 c11c5660 c11c5660
c3527ee0 04000001 c3385fc4 0000000a c0109fbd 0000000a c11c55660 c3385fc4
c03829a0 0000000a c3527ee0 c3385fc4 c010a138 0000000a c3385fc4  c3527ee0
Call Trace: [<c4958d51>] [<c0109fbd>] [<c010a138>] [<c010c428>]

Code: c7 46 20 98 ff ff ff 8b 43 10 8b 80 d8 00 00 00 8b 40 2c 8b

<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing"

First check if there are updates for your distribution, apply them /all/.

Another thing to consider is memory problems. In my experience, this is often due to CPU overheating (busted fan), bad power, or perhaps bad RAM (check out memtest86+ <http://www.memtest.org>).

Hope this helps

Signature · 4 lines
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                     Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria              +56 32 654239
Casilla 110-V, Valparaiso, Chile                Fax:  +56 32 797513