read() from driverfs files can read more bytes
Quoted 5 lines · Patrick Mochel
Quoted 4 lines
And neither of
driverfs_read_filenordriverfs_write_filesupports semantic we use with other filesystems: If at least one byte was read/written, return byte count (even if error happens). Only if zero bytes was written, return error code.
Quoted 8 lines
I would think that you would want to return the error code. Say you did:
echo "action parameter" > file
and 'parameter' is an invalid parameter, as determined by the driver. It would require another arbitrary check to determine if the command succeeded or not if it returned the number of bytes written. Returning
-EINVALlets userspace know that it made a boo-boo. Is that not good?
If you want bidirectional communication, something like SOCK_SEQPACKET or SOCK_DGRAM is better suitable. And if we learn open() to open unix sockets, even 'echo' can be still used for configuring. I understand that it is radical change, but why these configuration points should look like real files if they are not ones? And you do not have troubles with supporting lseek() on them - if contents of file is "minutes\n", is it correct to do lseek(fd, 1, SEEK_SET); write(fd, "onths\n", 6); or is it incorrect usage?
If you do not want to change these objects from files to sockets, I agree with your explanation for write(). But I do not agree with this semantic for read() - reading byte after byte, and reading in one big chunk should not yield in different results on regular files, otherwise couple of nasty surprises is hidding there.
Thanks,
Petr Vandrovec [email protected]
Quoted 24 lines · Petr Vandrovec
Quoted 5 lines · Patrick Mochel
Quoted 4 lines
And neither of
driverfs_read_filenordriverfs_write_filesupports semantic we use with other filesystems: If at least one byte was read/written, return byte count (even if error happens). Only if zero bytes was written, return error code.Quoted 8 lines
I would think that you would want to return the error code. Say you did:
echo "action parameter" > file
and 'parameter' is an invalid parameter, as determined by the driver. It would require another arbitrary check to determine if the command succeeded or not if it returned the number of bytes written. Returning
-EINVALlets userspace know that it made a boo-boo. Is that not good?If you want bidirectional communication, something like
SOCK_SEQPACKETorSOCK_DGRAMis better suitable. And if we learnopen()to open unix sockets, even 'echo' can be still used for configuring. I understand that it is radical change, but why these configuration points should look like real files if they are not ones? And you do not have troubles with supportinglseek()on them - if contents of file is "minutes\n", is it correct to dolseek(fd, 1, SEEK_SET);write(fd, "onths\n", 6); or is it incorrect usage?
Quoted 5 lines
If you do not want to change these objects from files to sockets, I agree with your explanation for
write(). But I do not agree with this semantic forread()- reading byte after byte, and reading in one big chunk should not yield in different results on regular files, otherwise couple of nasty surprises is hidding there.
Ok, I agree with your argument concerning read().
Concerning reading/writing from offsets, it's up to the drivers for them to either support it or not. In the files I've done so far, I return 0 if show() is called with an offset. Which will give different results if you read byte-by-byte or an entire chunk.
It makes the callbacks simpler, but it is not technically correct.
Something I did a while ago was implement default callbacks for basic types. So you would have something like:
default_show_u32(char * buf, size_t count, loff_t off, u32 * data)
{
...
}So the driver could do
driver_show(struct device * dev, char * buf, size_t count, loff_t off)
{
return default_show_u32(buf,count,off,&data);
}And in the default_* handle the offset appropriately.
If that seems reasonable, I'll dig it up and integrate it...
-pat
Hi!
Quoted 8 lines
Ok, I agree with your argument concerning
read().Concerning reading/writing from offsets, it's up to the drivers for them to either support it or not. In the files I've done so far, I return 0 if
show()is called with an offset. Which will give different results if you read byte-by-byte or an entire chunk.It makes the callbacks simpler, but it is not technically correct.
[snip solution]
Why not just say those files are character devices? It is okay for character device to behave like crazy ;-).
Pavel
Signature · 2 lines
(about SSSCA) "I don't say this lightly. However, I really think that the U.S. no longer is classifiable as a democracy, but rather as a plutocracy." --hpa