Skip to contentSkip to conversation

I2C: cleanup of i2c-nforce2

PATCH New Greg KH 1 participant 1 message Sep 5, 2005

Subsystems (2)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 I2C: cleanup of i2c-nforce2

[PATCH] I2C: cleanup of i2c-nforce2

attached is a small patch that removes unused code from i2c-nforce2 and adds a single debug message. The patch is against 2.6.13-rc3-mm1. I have tested the patch with 2.6.13-rc3: compiles cleanly and works as without the patch (as expected).

---
commit 5033017c2678df9dc75be0139f19701ff224a498
tree 8be76d0a5c08d37230ecd66c06d08d39650b4d31
parent a8decc658a8800e61f13b9240125f2a34d7fd3f5
author Hans-Frieder Vogt <[email protected]> Sat, 23 Jul 2005 15:33:39 +0200 committer Greg Kroah-Hartman <[email protected]> Mon, 05 Sep 2005 09:14:04 -0700

 drivers/i2c/busses/i2c-nforce2.c |   31 +++----------------------------
 1 files changed, 3 insertions(+), 28 deletions(-)
drivers/i2c/busses/i2c-nforce2.c +3 -28
@@ -131,7 +131,6 @@ static s32 nforce2_access(struct i2c_ada
 	struct nforce2_smbus *smbus = adap->algo_data;
 	unsigned char protocol, pec, temp;
 	unsigned char len = 0; /* to keep the compiler quiet */
-	int timeout = 0;
 	int i;
 
 	protocol = (read_write = I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
@@ -191,29 +190,10 @@ static s32 nforce2_access(struct i2c_ada
 		case I2C_SMBUS_PROC_CALL:
 			dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
 			return -1;
-			/*
-			outb_p(command, NVIDIA_SMB_CMD);
-			outb_p(data->word, NVIDIA_SMB_DATA);
-			outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
-			protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
-			read_write = I2C_SMBUS_READ;
-			break;
-			 */
 
 		case I2C_SMBUS_BLOCK_PROC_CALL:
 			dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
 			return -1;
-			/*
-			protocol |= pec;
-			len = min_t(u8, data->block[0], 31);
-			outb_p(command, NVIDIA_SMB_CMD);
-			outb_p(len, NVIDIA_SMB_BCNT);
-			for (i = 0; i < len; i++)
-				outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
-			protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
-			read_write = I2C_SMBUS_READ;
-			break;
-			*/
 
 		case I2C_SMBUS_WORD_DATA_PEC:
 		case I2C_SMBUS_BLOCK_DATA_PEC:
@@ -232,12 +212,6 @@ static s32 nforce2_access(struct i2c_ada
 
 	temp = inb_p(NVIDIA_SMB_STS);
 
-#if 0
-	do {
-		i2c_do_pause(1);
-		temp = inb_p(NVIDIA_SMB_STS);
-	} while (((temp & NVIDIA_SMB_STS_DONE) = 0) && (timeout++ < MAX_TIMEOUT));
-#endif
 	if (~temp & NVIDIA_SMB_STS_DONE) {
 		udelay(500);
 		temp = inb_p(NVIDIA_SMB_STS);
@@ -247,9 +221,10 @@ static s32 nforce2_access(struct i2c_ada
 		temp = inb_p(NVIDIA_SMB_STS);
 	}
 
-	if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
-		|| (temp & NVIDIA_SMB_STS_STATUS))
+	if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
+		dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp);
 		return -1;
+	}
 
 	if (read_write = I2C_SMBUS_WRITE)
 		return 0;