Skip to contentSkip to conversation

file transfer problem

Bluez-devel david 2 participants 2 messages Sep 12, 2005 Bluetooth drivers

lore
Share & tools
lore

david

author
#0 lore raw

hi,

I use bluez-utils-2.20 and run "hcidump -X -V" to see what happens. Then I try to use Sony Ericssion phone to transfer a file to my bluetooth device, but it fails. I get the following mssage,

/********* below is the msg **************/
HCI sniffer - Bluetooth packet analyzer ver 1.25
device: hci0 snap_len: 1028 filter: 0xffffffff

Quoted 1 line

HCI Event: Connect Request (0x04) plen 10

    bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
    bdaddr 00:0E:07:62:86:6C role 0x01
    Role: Slave
Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

    status 0x00 handle 40 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00

< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 40 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK

Quoted 1 line

HCI Event: Page Scan Repetition Mode Change (0x20) plen 7

    bdaddr 00:0E:07:62:86:6C mode 1
Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 40

< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 40 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
Quoted 1 line

HCI Event: Connection Packet Type Changed (0x1d) plen 5

status 0x00 handle 40 ptype 0x0018
Packet type: DM1 DH1

Quoted 1 line

ACL data: handle 40 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 40 packets 1

Quoted 1 line

ACL data: handle 40 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 251
< ACL data: handle 40 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 40 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 40 packets 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 40 packets 1

Quoted 1 line

ACL data: handle 40 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
Quoted 2 lines

ACL data: handle 40 flags 0x02 dlen 17
ACL data: handle 40 flags 0x01 dlen 17

    L2CAP(d): cid 0x0040 len 30 [psm 1]
        SDP SSA Req: tid 0x0 len 0x19
          pat uuid-16 0x1105 (OBEXObjPush)
          max 65535
          aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0009 (BTProfileDescList) 0x0100 (SrvName) 0x0303 (SuppFormatsList)
          cont 00
< ACL data: handle 40 flags 0x02 dlen 184
    L2CAP(d): cid 0x0040 len 180 [psm 1]
        SDP SSA Rsp: tid 0x0 len 0xaf
          count 172
          record #0
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1105 (OBEXObjPush) >
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x1 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "OBEX Object Push"
              aid 0x0303 (SuppFormatsList)
                 < uint 0xff >
          record #1
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1105 (OBEXObjPush) >
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x1 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "OBEX Object Push"
              aid 0x0303 (SuppFormatsList)
                 < uint 0xff >
          cont 00
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 40 packets 1

Quoted 1 line

ACL data: handle 40 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 40 packets 1

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 40 reason 0x13
Reason: Remote User Terminated Connection

Quoted 1 line

HCI Event: Connect Request (0x04) plen 10

    bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
    bdaddr 00:0E:07:62:86:6C role 0x01
    Role: Slave
Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

    status 0x00 handle 41 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00

< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK

Quoted 1 line

HCI Event: Page Scan Repetition Mode Change (0x20) plen 7

    bdaddr 00:0E:07:62:86:6C mode 1
Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6

    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 41

< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 41 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 1 scid 0x0041
Quoted 1 line

HCI Event: Connection Packet Type Changed (0x1d) plen 5

status 0x00 handle 41 ptype 0x0018
Packet type: DM1 DH1
< ACL data: handle 41 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
      Connection successful
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
Quoted 2 lines

ACL data: handle 41 flags 0x02 dlen 17
ACL data: handle 41 flags 0x01 dlen 11

    L2CAP(d): cid 0x0040 len 24 [psm 1]
        SDP SSA Req: tid 0x0 len 0x13
          pat uuid-16 0x1105 (OBEXObjPush)
          max 65535
          aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0303 (SuppFormatsList)
          cont 00
< ACL data: handle 41 flags 0x02 dlen 116
    L2CAP(d): cid 0x0041 len 112 [psm 1]
        SDP SSA Rsp: tid 0x0 len 0x6b
          count 104
          record #0
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1105 (OBEXObjPush) >
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x1 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0303 (SuppFormatsList)
                 < uint 0xff>
          record #1
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1105 (OBEXObjPush) >
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x1 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0303 (SuppFormatsList)
                 < uint 0xff>
          cont 00
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0042 result 0 status 0
      Connection successful
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 4
      MTU 1024
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 2 lines

ACL data: handle 41 flags 0x02 dlen 17
ACL data: handle 41 flags 0x01 dlen 1

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 251
Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0042 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 2 lines

ACL data: handle 41 flags 0x02 dlen 17
ACL data: handle 41 flags 0x01 dlen 2

L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 246 max_retrans 0 credits 7
< ACL data: handle 41 flags 0x02 dlen 8

    L2CAP(d): cid 0x0042 len 4 [psm 3]
      RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0042 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

ACL data: handle 41 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0042
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 41 packets 1

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 41 reason 0x13
Reason: Remote User Terminated Connection
/*************************************/

Quoted 5 lines

From: Marcel Holtmann <marcel@ho...>
Re: file transfer problem
2005-09-08 16:14
Hi David,

Quoted 9 lines

I meet a problem while doing file transfer using bluez-2.9.
Some phone cannot find my services I register. I browse my sevice and
get the following message:
...
So I compare my phone's service with others'.
I find the only difference between them is that my Service RecHandle is different from others. My Service Rechandle is very big such as ox804fa00. Others are 0x10000, 0x10001...,and so on. Is there anything to do with Service RecHandle why other bluetooth devices cannot find my bluetooth services? I am expecting for you reply. Thanks very much.

did you tried to use bluez-utils-2.20? Run "hcidump -X -V" to see what the phone is looking for.

Regards

Marcel

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#1 lore raw

Hi David,

Quoted 3 lines

I use bluez-utils-2.20 and run "hcidump -X -V" to see what happens. Then I try to use Sony Ericssion phone to transfer a file to my bluetooth device, but it fails. I get the following mssage,

you need a service running on RFCOMM channel 1 that accepts incoming OBEX connections.

Regards

Marcel

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel