Skip to contentSkip to conversation

2.6.13 brings buffer underruns when burning DVDs at high speeds (16x)

DISCUSSION Mathieu Fluhr 2 participants 3 messages Sep 12, 2005 – Sep 13, 2005

lore
Share & tools
lore
#0 lore raw

Hello all,

It seems that something has been broken when passing from 2.6.12 to 2.6.13 regarding the SCSI burning engine. When burning a DVD at 16x (with ide-cd SEND_PACKET command, or with the SG interface, no matter the driver used), you get tons of buffer underruns. This was not appearing in 2.6.12.

I would suspect something in the block devices driver, but I am not really sure... and I did not have enough time yet to look deeply in the source code ;-)

Best Regards,
Mathieu

#1 lore raw

Hummm Okay. After making some ugly changes (I basically reverted all the /drivers/block subdir to version 2.6.12.6), I still have buffer underruns.

Does anyone know where it could come from ? I would say that I am a little bit stuck now. I am quite sure that it is also not comming from the devices driver (ide-cd, usb-storage...) as I tried with different devices on different ports (mostly IDE and emulated SCSI via USB) with the same result.

Note: This is also happening with k3b ;-)

Quoted 20 lines · Mathieu Fluhr

Hello all,

It seems that something has been broken when passing from 2.6.12 to 2.6.13 regarding the SCSI burning engine. When burning a DVD at 16x (with ide-cd SEND_PACKET command, or with the SG interface, no matter the driver used), you get tons of buffer underruns. This was not appearing in 2.6.12.

I would suspect something in the block devices driver, but I am not really sure... and I did not have enough time yet to look deeply in the source code ;-)

Best Regards,
Mathieu

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to Mathieu Fluhr
Quoted 5 lines · Mathieu Fluhr

It seems that something has been broken when passing from 2.6.12 to 2.6.13 regarding the SCSI burning engine. When burning a DVD at 16x (with ide-cd SEND_PACKET command, or with the SG interface, no matter the driver used), you get tons of buffer underruns. This was not appearing in 2.6.12.

I've filed a bug at kernel bugzilla, so your report won't be lost. See
http://bugme.osdl.org/show_bug.cgi?id=5242

Please, register at http://bugme.osdl.org/createaccount.cgi and add yourself to bug's CC list.