Advantech Watchdog timer query.
Hi Everyone,
I work for a government agency so please forgive me for not having the latest version of the kernel. My question concerns an Advantech card PCI 6870 Single Board Computer and its watchdog timer. I am running Redhat 9 linux 2.4.20-8 and it comes with module that supports the hardware advantechwdt.o. I have been able install and communicate with the card. Get and set the timeout or margin and get the support information of the card. Everything seems to work except when i deliberately delay the ping to the card to let it reboot the system as a watchdog should it does not reboot. Is there something i am missing. Do i need a update to the driver? I am attaching the code. It is fairly simple and a lot of it is just reading and writing information read from the driver about the card. I would appreciate any help.
Cheers
Ryan Clayburn
Can i please be CC'ed the answers/comments posted to the list in response to my posting
************************************************************************
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <time.h>
#include <sys/time.h>
int main(int argc, const char *argv[])
{
int fd;
struct watchdog_info *wdog_info;
time_t timenow;
char supportOptions[500];
char dtime[50];
int i, err;
int timein, timeout;
fd = open("/dev/watchdog",O_WRONLY);
if (fd==-1)
{
perror("watchdog");
return 1;
}
//printf("argc = %d\n", argc);
err = ioctl(fd, WDIOC_GETSUPPORT, wdog_info);
if (err < 0)
printf("error is %d\n", err);
if (wdog_info->options & WDIOF_KEEPALIVEPING)
strcpy(supportOptions, "WDIOF_KEEPALIVEPING");
if (wdog_info->options & WDIOF_MAGICCLOSE)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_MAGICCLOSE");
}
else
{
strcat(supportOptions, " | WDIOF_MAGICCLOSE");
}
}
if (wdog_info->options & WDIOF_SETTIMEOUT)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_SETTIMEOUT");
}
else
{
strcat(supportOptions, " | WDIOF_SETTIMEOUT");
}
}
if (wdog_info->options & WDIOF_POWEROVER)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_POWEROVER");
}
else
{
strcat(supportOptions, " | WDIOF_POWEROVER");
}
}
if (wdog_info->options & WDIOF_CARDRESET)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_CARDRESET");
}
else
{
strcat(supportOptions, " | WDIOF_CARDRESET");
}
}
if (wdog_info->options & WDIOF_POWERUNDER)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_POWERUNDER");
}
else
{
strcat(supportOptions, " | WDIOF_POWERUNDER");
}
}
if (wdog_info->options & WDIOF_EXTERN2)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_EXTERN2");
}
else
{
strcat(supportOptions, " | WDIOF_EXTERN2");
}
}
if (wdog_info->options & WDIOF_EXTERN1)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_EXTERN1");
}
else
{
strcat(supportOptions, " | WDIOF_EXTERN1");
}
}
if (wdog_info->options & WDIOF_FANFAULT)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_FANFAULT");
}
else
{
strcat(supportOptions, " | WDIOF_FANFAULT");
}
}
if (wdog_info->options & WDIOF_OVERHEAT)
{
if (strlen(supportOptions) == 0)
{
strcpy(supportOptions, "WDIOF_OVERHEAT");
}
else
{
strcat(supportOptions, " | WDIOF_OVERHEAT");
}
}
printf("\nWATCHDOG TIMER DAEMON\n");
printf("---------------------\n\n");
printf("Wdioc Get Support Information\n");
printf("-------------------------------------\n");
printf("Options: %s\nFirmware Version: %d\n", supportOptions,
wdog_info->firmware_version);
printf("Identity: ", wdog_info->identity);
for (i = 0; i < 32; i++)
{
printf("%c", wdog_info->identity[i]);
}
printf("\n-------------------------------------\n\n");
ioctl(fd, WDIOC_GETTIMEOUT, &timein);
printf("The current timeout is %d seconds\n", timein);
timeout = 30;
ioctl(fd, WDIOC_SETTIMEOUT, &timeout);
printf("The timeout was set to %d seconds\n", timeout);
time(&timenow);
strcpy(dtime, ctime(&timenow));
printf("%s", dtime);
while(1)
{
//write(fd, "\0", 1);
ioctl(fd, WDIOC_KEEPALIVE, 0);
if (err < 0)
printf("error is %d\n", err);
sleep(timeout*2+10);
time(&timenow);
strcpy(dtime, ctime(&timenow));
printf("%s", dtime);
}
close(fd);
printf("bye bye...\n");
return 0;
}Quoted 3 lines · Ryan Clayburn
card. Everything seems to work except when i deliberately delay the ping to the card to let it reboot the system as a watchdog should it does not reboot. Is there something i am missing. Do i need a update to the
It ought to just work. Do check the ioctl call returns when setting the timeout do not report an error however.
Quoted 14 lines · Ryan Clayburn
Hi Everyone,
I work for a government agency so please forgive me for not having the latest version of the kernel. My question concerns an Advantech card PCI 6870 Single Board Computer and its watchdog timer. I am running Redhat 9 linux 2.4.20-8 and it comes with module that supports the hardware advantechwdt.o. I have been able install and communicate with the card. Get and set the timeout or margin and get the support information of the card. Everything seems to work except when i deliberately delay the ping to the card to let it reboot the system as a watchdog should it does not reboot. Is there something i am missing. Do i need a update to the driver? I am attaching the code. It is fairly simple and a lot of it is just reading and writing information read from the driver about the card. I would appreciate any help.
Be careful that you're using the correct driver. Certain newer advantech systems use the w83627hf chip, which is not supported in 2.4 by default. Backporting the driver from 2.6 should be trivial.
Pádraig.