PATCH: Bluesmoke missing renames
Subsystems (2)
As was noted on and off list a couple of places still had old naming
Signed-off-by Alan Cox <[email protected]>
drivers/edac/Kconfig +2 -2
@@ -34,9 +34,9 @@ depends on EDAC help Some systems are able to detect and correct errors in main - memory. Bluesmoke can report statistics on memory error + memory. EDAC can report statistics on memory error detection and correction (EDAC - or commonly referred to ECC - errors). Bluesmoke will also try to decode where these errors + errors). EDAC will also try to decode where these errors occurred so that a particular failing memory module can be replaced. If unsure, select 'Y'.
drivers/edac/e752x_edac.c +1 -1
@@ -13,7 +13,7 @@* Wang Zhenyu at intel.com * Dave Jiang at mvista.com * -* $Id: bluesmoke_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ +* $Id: edac_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ * */
Quoted 2 lines · Alan Cox
As was noted on and off list a couple of places still had old naming
You forgot the one in the Makefile :-)
--- linux-2.6.14-rc4-mm1-orig/drivers/edac/Makefile 2005-10-17
12:00:36.000000000 +0200
+++ linux-2.6.14-rc4-mm1/drivers/edac/Makefile 2005-10-17 15:03:49.000000000 +0200
@@ -1,5 +1,5 @@
#
-# Makefile for the Linux kernel bluesmoke drivers. +# Makefile for the Linux kernel EDAC drivers.
#
# Copyright 02 Jul 2003, Linux Networx (http://lnxi.com)
# This file may be distributed under the terms of the
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html