athlon x2 + 2.6.14 + SMP = fast clock
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
'cat /proc/interrupts' returns:
CPU0 CPU1
0: 30834589 31107050 IO-APIC-edge timer 1: 267 72633 IO-APIC-edge i8042 8: 0 0 IO-APIC-edge rtc 12: 8662 2216469 IO-APIC-edge i8042 15: 43599 10919362 IO-APIC-edge ide1 17: 1577 423629 IO-APIC-level libata 18: 61263 47314795 IO-APIC-level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3 19: 2026 485190 IO-APIC-level eth0 20: 54 14118 IO-APIC-level ATI IXP 21: 0 2 IO-APIC-level acpi, ohci1394 NMI: 2611 3571 LOC: 30969789 30969781 ERR: 146 MIS: 0
On my other SMP systems ( admittedly 4-way 2.4.30 ) timer interrupts are processed only by CPU0.
Perhaps unrelated, my kernel log is filled with these messages:
Nov 8 00:44:19 jones kernel: [301738.837187] APIC error on CPU0: 40(40) Nov 8 00:44:19 jones kernel: [301738.849596] APIC error on CPU1: 40(40) Nov 8 02:35:25 jones kernel: [305067.785826] APIC error on CPU0: 40(40) Nov 8 02:35:25 jones kernel: [305067.808330] APIC error on CPU1: 40(40) Nov 8 03:34:47 jones kernel: [306846.571532] APIC error on CPU0: 40(40) Nov 8 03:34:47 jones kernel: [306846.598922] APIC error on CPU1: 40(40) Nov 8 03:50:47 jones kernel: [307325.974012] APIC error on CPU0: 40(40) Nov 8 03:50:47 jones kernel: [307326.002707] APIC error on CPU1: 40(40) Nov 8 03:50:47 jones kernel: [307325.983997] APIC error on CPU0: 40(40) Nov 8 03:50:47 jones kernel: [307326.012689] APIC error on CPU1: 40(40)
Not sure if this is relevant:
http://leaf.dragonflybsd.org/mailarchive/commits/2005-11/msg00038.html
If you want dmesg, .config or other, contact me off list, I am not subscribed.
Chris
Quoted 2 lines · Christopher Mulcahy
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
Is this a new regression or did the problem occur with 2.6.13 or older kernels?
Would you mind opening a kernel bug and attaching your dmesg and config?
Also try booting w/ "idle=poll" to see if that doesn't clear up the issue.
thanks
-john
Quoted 6 lines · john stultz
Quoted 2 lines · Christopher Mulcahy
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
Is this a new regression or did the problem occur with 2.6.13 or older kernels?
This is a new-machine.
The only other kernel it has seen is the distro-install-kernel ( 2.6.12 uni-processor (ubuntu-5.10) ) ( this kernel does not have a problem, but it is not SMP )
I will try to find time to build 2.4.13 and 2.4.12 SMP kernels with the ~same config to see if they have the same problem. ( I presume I could then attach these findings to the original bugzilla report? )
Quoted 5 lines
Would you mind opening a kernel bug and attaching your dmesg and config?
will do.
Quoted 4 lines
Also try booting w/ "idle=poll" to see if that doesn't clear up the issue.
Tried that without results.
Quoted 6 lines
thanks
-john
Quoted 7 lines · Christopher Mulcahy
Quoted 6 lines · john stultz
Quoted 2 lines · Christopher Mulcahy
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
Is this a new regression or did the problem occur with 2.6.13 or older kernels?
Quoted 8 lines
This is a new-machine.
The only other kernel it has seen is the distro-install-kernel ( 2.6.12 uni-processor (ubuntu-5.10) ) ( this kernel does not have a problem, but it is not SMP )I will try to find time to build 2.4.13 and 2.4.12 SMP kernels with the ~same config to see if they have the same problem. ( I presume I could then attach these findings to the original bugzilla report? )
There are a few similar sounding bugs out there:
If its an ATI chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3927
If its an nvidia chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3341
Quoted 5 lines
Quoted 4 lines
Would you mind opening a kernel bug and attaching your dmesg and config?
will do.
Please tag me as the owner when you do.
Quoted 5 lines
Quoted 4 lines
Also try booting w/ "idle=poll" to see if that doesn't clear up the issue.
Tried that without results.
Bummer. Your box may not boot, but trying noapic might help as well.
thanks
-john
On Tue, 08 Nov 2005 14:59:25 -0800
john stultz <[email protected]> mentioned:
Quoted 17 lines · Christopher Mulcahy
Quoted 7 lines · john stultz
Quoted 6 lines · Christopher Mulcahy
Quoted 2 lines
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
Is this a new regression or did the problem occur with 2.6.13 or older kernels?
Quoted 8 lines
This is a new-machine.
The only other kernel it has seen is the distro-install-kernel ( 2.6.12 uni-processor (ubuntu-5.10) ) ( this kernel does not have a problem, but it is not SMP )I will try to find time to build 2.4.13 and 2.4.12 SMP kernels with the ~same config to see if they have the same problem. ( I presume I could then attach these findings to the original bugzilla report? )
Quoted 6 lines
There are a few similar sounding bugs out there:
If its an ATI chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3927If its an nvidia chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3341
My machine's clock runs about 2X from normal speed. Could you try my patch which I just posted a hour ago?
http://marc.theaimsgroup.com/?l=linux-kernel&m=113249769027262&w=2
The patch will detect whether IO-APCI timer interupt is generated too fast and try to use a legacy i8259A IRQ instead.
It might help. It also worked on 2.4.31 kernel for me.
Quoted 27 lines
Quoted 7 lines
Quoted 6 lines
Would you mind opening a kernel bug and attaching your dmesg and config?
will do.
Please tag me as the owner when you do.
Quoted 5 lines
Quoted 4 lines
Also try booting w/ "idle=poll" to see if that doesn't clear up the issue.
Tried that without results.
Bummer. Your box may not boot, but trying noapic might help as well.
thanks
(quoted diff) +0
-2-john -To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 1 line
Akira Tsukamoto <[email protected], [email protected]>
I am using arch amd64.
I applied this patch.
http://bugzilla.kernel.org/attachment.cgi?id=6061&action=view
It applies to 2.6.14.2 so long as you remove the static declaration of 'int disable_timer_pin_1'
It appears to have solved my problem.
Chris
Quoted 66 lines · Akira Tsukamoto
On Tue, 08 Nov 2005 14:59:25 -0800
john stultz <[email protected]> mentioned:Quoted 17 lines · Christopher Mulcahy
Quoted 7 lines · john stultz
Quoted 6 lines · Christopher Mulcahy
Quoted 2 lines
I am running 2.6.14 SMP on an dual-core athlon x2 3800. The system clock runs at roughly twice normal speed.
Is this a new regression or did the problem occur with 2.6.13 or older kernels?
Quoted 8 lines
This is a new-machine.
The only other kernel it has seen is the distro-install-kernel ( 2.6.12 uni-processor (ubuntu-5.10) ) ( this kernel does not have a problem, but it is not SMP )I will try to find time to build 2.4.13 and 2.4.12 SMP kernels with the ~same config to see if they have the same problem. ( I presume I could then attach these findings to the original bugzilla report? )
Quoted 6 lines
There are a few similar sounding bugs out there:
If its an ATI chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3927If its an nvidia chipset, check out
http://bugzilla.kernel.org/show_bug.cgi?id=3341My machine's clock runs about 2X from normal speed. Could you try my patch which I just posted a hour ago?
http://marc.theaimsgroup.com/?l=linux-kernel&m=113249769027262&w=2The patch will detect whether IO-APCI timer interupt is generated too fast and try to use a legacy i8259A IRQ instead.
It might help. It also worked on 2.4.31 kernel for me.
Quoted 27 lines
Quoted 7 lines
Quoted 6 lines
Would you mind opening a kernel bug and attaching your dmesg and config?
will do.
Please tag me as the owner when you do.
Quoted 5 lines
Quoted 4 lines
Also try booting w/ "idle=poll" to see if that doesn't clear up the issue.
Tried that without results.
Bummer. Your box may not boot, but trying noapic might help as well.
thanks
(quoted diff) +0
-2-john -To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · Christopher Mulcahy
I am using arch amd64.
I applied this patch.
http://bugzilla.kernel.org/attachment.cgi?id=6061&action=view
It applies to 2.6.14.2 so long as you remove the static declaration of 'int
disable_timer_pin_1'It appears to have solved my problem.
I wonder is this is x86_64 only problem?
I'm having the same problem on dual xeon 1.8GHz i686 with HT enabled, kernel 2.6.14.2-4smp. Clock runs twice fast. Previously I was using 2.6.11 kernel with no such problem.
cmdline is: acpi=ht nmi_watchdog=1
Unfortunately I can't do any testing right now on this machine but I'll try acpi_skip_timer_override cmdline option as soon as I can.
Quoted 1 line
Chris
00:00.0 Host bridge: Intel Corporation E7500 Memory Controller Hub (rev 03) 00:02.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface B PCI-to-PCI Bridge (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CA LPC Interface Controller (rev
02)
00:1f.1 IDE interface: Intel Corporation 82801CA Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) 01:01.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 10)
01:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 02:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03) 02:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 03) 02:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 03) 02:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 03) 03:03.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02) 04:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 47938745 0 0 0 IO-APIC-edge timer
2: 0 0 0 0 XT-PIC cascade
4: 41666 0 0 0 IO-APIC-edge serial
8: 3 0 0 0 IO-APIC-edge rtc
145: 0 0 0 0 IO-APIC-level
uhci_hcd:usb1
153: 49053282 0 0 0 IO-APIC-level eth0
169: 3839290 0 0 0 IO-APIC-level qla2300
177: 45129167 0 0 0 IO-APIC-level eth1
NMI: 47939763 47939734 47939732 47939731
LOC: 47943502 47944012 47944469 47944277
ERR: 0
MIS: 0Signature · 2 lines
Arkadiusz Miśkiewicz PLD/Linux Team http://www.t17.ds.pwr.wroc.pl/~misiek/ http://ftp.pld-linux.org/
On Mon, 21 Nov 2005 10:28:03 +0100
Arkadiusz Miskiewicz <[email protected]> mentioned:
Quoted 6 lines
I wonder is this is
x86_64only problem?I'm having the same problem on dual xeon 1.8GHz i686 with HT enabled, kernel 2.6.14.2-4smp. Clock runs twice fast. Previously I was using 2.6.11 kernel with no such problem.
My laptop, clock runs twice fast but has PentiumM, so it shouldn't be x86_64 specific.
Quoted 7 lines
cmdline is: acpi=ht nmi_watchdog=1
Unfortunately I can't do any testing right now on this machine but I'll try
acpi_skip_timer_overridecmdline option as soon as I can.Quoted 1 line
Chris
Signature · 1 line
Akira Tsukamoto <[email protected]> <>