Does Linux support powering down SATA drives?
Quoted 2 lines
I would agree with your view on IDE becoming obsolete on hard drives, but I as yet, am not aware of any CD/DVD drives with a SATA interface.
$ cat /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: PLEXTOR Model: DVDR PX-716A Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Host: scsi5 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 $ /sbin/lspci | grep -i scsi $ /sbin/lspci | grep -i ata 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 01:09.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
And BTW,
# /sbin/hdparm -M 128 /dev/hda
/dev/hda:
setting acoustic management to 128
acoustic = 0 (128=quiet ... 254=fast)
(failure but I don't care the drive is old and already in AAM mode)
# /sbin/hdparm -M 128 /dev/sda
/dev/sda:
setting acoustic management to 128 HDIO_GET_ACOUSTIC failed: Inappropriate ioctl for device
(This drive however is not and needs it dearly. Plus it's the Linux drive, so it's used most of the time)
Regards,
Signature · 1 line
Nicolas Mailhot