ACPI on hp nx6125 doesn't update battery state
Hi,
I now discovered that the battery state doesn't update after the temperature reaches the first trip point. I'm not totaly sure, but I think it's right...
Hope you can help me,
Carsten
-- My first mail:
Quoted 22 lines
Carsten Tschense
Sent: 2005年11月19日 6:22
To: [email protected]
Subject: [ACPI] ACPI on hp nx6125 doesn't update battery stateHi,
I bought a HP Compaq nx6125 2 days ago...
After booting the information in/proc/acpi/battery/C175/stateupdate regulary, but after a while they don't. I don't see any errors in dmesg,/var/log/messagesor/var/log/acpid.
Well, now the strange solution:
cat/proc/acpi/thermal_zone/TZ1/temperature
That's the thermal zone of the cpu. After doing this, the fan starts blowing for a while, the cpu usage increases to 100% for about 2 seconds
(may vary), the systems repeats very slow.
Now the battery state updates, the system runs as normal. If you do a cat/proc/acpi/thermal_zone/TZ1/temperaturenow, nothing happens, after circa 5 minutes the same happens again.
The temperature looks correct all the time. viewing the temperature of another thermal zone doesn't help...
Quoted 8 lines
That's a bit strange, isn't it? ;)
I hope you can help me... :) should I provide some debugging information?I'm running a 2.6.14 with gentoos patchset r2.
Bye,
Carsten
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_idv28&alloc_id845&op=click