Skip to contentSkip to conversation

New: 2.6.0-test10 hangs in aix79xxx after iocell_workaround message

Bug 1584 Martin J. Bligh 1 participant 1 message Nov 24, 2003

lore
Share & tools
lore
#0 lore raw

http://bugme.osdl.org/show_bug.cgi?id=1584

Summary: 2.6.0-test10 hangs in aix79xxx after iocell_workaround
message
Kernel Version: 2.6.0-test10 SMP
Status: NEW
Severity: blocking
Owner: [email protected]
Submitter: [email protected]

Distribution:
Hardware Environment: P4-Xeon-2.4GHz 2GB Adaptec 39320/AIC7902 Software Environment: Redhat 9.0
Problem Description:
Booting 2.6.0-test10 fails in AIC79XX (spinlock problem?) after executing iocell_workaround in aic79xx_core.c (last message with ahd_debug set to 15) since there were no changes to aic* since -test9 (which works fine) I'm assuming the problem is in scsi.c which has many changes, most involving adding spinlocks. The aic79xx module is loaded in the kernel (=y, not as a module =m) at compile time.

Steps to reproduce:

boot -test10 kernel with either a 39320 U320 scsi controller or the motherboard equivalent the AIC7902. With no debug on, the kernel hangs hard (no <ctrl-alt-del>) just after showing the IDE partitions.
Setting the module parameter ahd_debug=15 to enable lots of messages shows printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); at 5383 in aic79xx.c as the last known entry in syslog.